Starting A Warm Engine; Operating The Drive Select Lever And Driving In Reverse - Yamaha GRIZZLY 350 Owner's Manual

NOTE:
The engine is warm when it responds normally to
the throttle with the starter (choke) turned off.
EBU20291

Starting a warm engine

Follow the same procedure as for starting a cold
engine, with the exception that the starter (choke)
is not required when the engine is warm. Instead,
start the engine with the throttle slightly open.
EBU20380
Operating the drive select lever and
driving in reverse
ECB00170
CAUTION:
Before shifting, stop the ATV, otherwise the
transmission may be damaged.
Shifting: Forward
1. Bring the ATV to a complete stop.
2. Shift from neutral to forward and vice versa by
moving the drive select lever along the shift
guide.
NOTE:
Make sure that the drive select lever is completely
shifted into position.
1. Drive select lever
2. F (Forward)
3. N (Neutral)
4. R (Reverse)
3. Open the throttle lever gradually.
Shifting: Reverse
1. Bring the ATV to a complete stop.
2. Apply the brake pedal.
6-3
6