Related Manuals for MTD 190-833-OEM
Summary of Contents for MTD 190-833-OEM
- Page 1 Form No. 3365-739 Rev A OPERATOR'S MANUAL 46" SNOW BLADE Model Numbers 190-833-OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722 PRINTED IN U.S.A. FORM NO. 48829 (REV. 7/03)
-
Page 2: Rules For Safe Operation
RULES FOR SAFE OPERATION Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when operating equipment. 1. Read the tractor and snow blade owners manuals and know how to operate your tractor before using tractor with snow blade attachment. -
Page 3: Contents Of Hardware Pack
SHOWN FULL SIZE NOT SHOWN FULL SIZE CONTENTS OF HARDWARE PACK Key Qty Description Key Qty Description Hex Bolt, 3/8" x 3-1/2" Lock Washer, 3/8" Hex Bolt, 1/4" x 3-1/4" Flat Washer, 3/8" Hex Bolt, 3/8" x 1" Lg. Flat Washer, 1/2" Hex Bolt, 5/16"... -
Page 4: Section 1: Assembly Instructions
ASSEMBLING BRACKETS TO TRACTOR SECTION 1: ASSEMBLY INSTRUCTIONS FAST-ATTACH TRACTOR FRAMES No bracket assembly required. Skip to ASSEMBLING THE SNOW BLADE. NOTE: Right hand (R.H.) and left hand (L.H.) are deter- mined from the operators position while seated on the tractor. STANDARD TRACTOR FRAMES WITH 15"... - Page 5 ASSEMBLING THE SNOW BLADE 14. Using a hammer, assemble a 3/8" palnut onto one end of the spring mount rod. Insert the other end of the rod through the rear set of holes in the pivot 10. Assemble the long and short angle lock bars together using two 3/8"...
- Page 6 16. To attach the channel assembly to the blade, align 19. Assemble the R.H. and L.H. hitch brackets to the the pivot plate between the welded brackets on the angle support brackets using four 3/8" x 1" hex bolts back of the blade. Insert the pivot shaft through the and 3/8"...
-
Page 7: Attaching Snow Blade To Tractor
ATTACHING SNOW BLADE TO TRACTOR 21. Insert the end of the lower lift handle assembly through the notch in the pivot support bracket and through the QUICK ATTACH TRACTOR FRAMES holes in the channel. Align the lift link pin with the hole 24. -
Page 8: Section 2: Operating The Blade
SECTION 2: OPERATING THE BLADE SECTION 3: ADJUSTMENTS CAUTION: Inspect the area to be worked To Adjust Blade Spring carefully before operating the snow blade. Avoid pipes, roots, curbs or other heavy obstructions. The blade adjust spring allows the blade to tilt forward to bypass solid obstructions. - Page 9 NOTES...
- Page 10 NOTES...
- Page 11 NOTES...
- Page 12 If you are having difficulty assembling this product or if you have any question regarding the controls, operation or maintenance of this unit, please call the Customer Support Department. You can reach them by calling: 1-800-800-7310...