FX
/FX
/FX
/FX
/FX
3S
3G
3GC
3U
FX
-4AD-PNK-ADP (4-channel Resistance Thermometer Data Input)
3U
1.2
Setup Procedure Before Starting Operation
Before starting analog input using PNK-ADP, follow the procedure below to set up the system:
FX
3U
Specifications check
System configuration and selection
Programming
If the error status data or the input analog value is
abnormal, refer to Chapter 5 "Troubleshooting."
K-4
PLC User's Manual - Analog Control Edition
3UC
-4AD-PNK-ADP
Refer to Chapter 1.
Outline
Refer to Chapter 2.
Refer to the common
pages.
Refer to Chapter 3.
Wiring
Refer to Chapter 4.
1.2 Setup Procedure Before Starting Operation
Outline of system:
•Compatible PLC version number
•Compatible programming tool version number
Specifications:
•Operation environment
•Performance specifications
•Input characteristics
System configuration:
(Refer to the common pages for analog control.)
•Selection of units
Wiring:
•Selection of sensor cable
•Power supply line
•Analog input line
Programming:
•Details of special devices
•Examples of basic programs
1 Outline