Table of Contents
Advertisement
Chapter 5. Software
There is both a DOS program (DTT_DOS.EXE) and a
Windows program (232DTT_W.EXE) which allow you to read the
current temperature in either Fahrenheit or Celsius, as well as set
the upper and lower thresholds.
Installation
To install on your hard drive follow these steps:
•
Place the disk in drive A.
•
Type A: and press the ENTER key.
•
Type INSTALL and press the ENTER key.
Windows Setup
After the software is installed on your hard disk, the
following files should be located in the 232DTT directory:
232DTT_W.EXE, VBRUN300.DLL, and MSCOMM.VBX.
To set up the 232DTT under windows follow the following steps:
1. Run Windows.
2. Select the "FILE" menu under the Program Manager.
3. Select the "NEW" option.
4. From the "New Program Object" window select "Program Item"
option and then select "OK".
5. From the "Program Item Properties" window:
a) Type in the "Description" box:
b) Type in the "Command Line" box:
6. From the "Program Item Properties" menu select the "OK"
option.
Setup of the 232DTT is now complete. The 232DTT icon should
now appear in the current window. Simply double click on the icon
to execute the program.
10
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 434-7094
232DTT
C:\232DTT\232DTT_W.EXE
Chapter 5
232DTT1795 Manual
Advertisement
Table of Contents
