Table of Contents
Advertisement
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage is set in stages
from 0 to 6.
It is set to 3 at the factory.
If the function to adjust the Automatic
programme has been activated, the
amount of rinse aid dispensed in the
Automatic
programme can be higher
than that set.
If spots appear on crockery and glass-
ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
Select the desired setting with
and confirm with
+/-
OK
.
Consumption (EcoFeedback)
You can programme the dishwasher so
that the energy and water consumption
of the currently selected programme
appears in the display. The estimated
consumption can be displayed before
the programme starts and the actual
consumption can be displayed after the
programme has finished.
In this menu you can also call up the
total energy and water used in all previ-
ous dishwasher programmes (see
"Caring for the environment,
EcoFeedback consumption indicator").
Consumption indicator
Select the
Display consumption
Select the setting you want and con-
firm with
.
OK
Total consumption
You can display the values for
and
Water
.
Select the
Total consumption
You can also reset the values for the
total consumption to 0.
Select the
Reset
Select the
Yes
Confirm the message with
The values are now reset to 0.
Settings menu
option.
Energy
option.
option.
option.
OK
.
95
Advertisement
Table of Contents
