How To Assemble - Vax U90-P5 Series Instruction Manual

U90-P5 & U90-P6 Series User Guide v1.2.qxd:UG
vax.co.uk

3. How to Assemble

IMPORTANT: Always unplug the vacuum cleaner
!
from the electrical outlet before assembling or
removing the accessories.
Tool required: Phillips screwdriver
1. Slide the back panel onto the base (Fig.3/1).
Fig.3/1
2. To secure, insert the two (2) screws into the front of the
back panel (Fig.3/2).
Fig.3/2
3. Slide the end of the lower hose onto the side connector
(Fig.3/3).
Fig.3/3
4
assembly
13/5/10 14:46 Page 4
4. Place the upper handle onto the upright back panel
(Fig.3/4).
Fig.3/4
5. Insert locking part into slot (Fig.3/5).
Fig.3/5
6. Insert the screw into the back of the handle and screw
it into the locking part. Tighten until secure (Fig.3/6).
Back of
unit
Fig.3/6