Center High-Mounted Stoplamp (Chmsl) - GMC SAVANA 2013 Owner's Manual

5. Remove the taillamp assembly
from the vehicle.
6. Remove the taillamp/turn signal
lamp (1) or back-up lamp (2)
bulb socket by turning it
counterclockwise one-quarter
turn and pulling it out of the lamp
assembly.
7. Remove the bulb by pulling it
straight out.
8. Push the new bulb into the
socket.
9. Reinstall the bulb socket by
turning it clockwise into the lamp
assembly.
10. Reverse Steps 1 5 to reinstall
the taillamp assembly and
applique.
Center High-Mounted
Stoplamp (CHMSL)
The CHMSL is above the rear doors
at the center of the vehicle.
To replace a bulb:
Vehicle Care
1. Remove the two screws from the
CHMSL assembly.
2. Remove the CHMSL assembly.
3. Turn the bulb socket
counterclockwise one-quarter
turn to remove it from the lamp
assembly.
4. Pull the old bulb straight out of
the socket and push the new
bulb into the socket.
5. Turn the bulb socket clockwise
one-quarter turn to install it in
the lamp assembly.
6. Reinstall the CHMSL assembly
and two screws.
Do not block or damage the CHMSL
when items are loaded on the roof
of the vehicle.
10-35