Cleaning/Replacing The Motor Filter - Oreck QUEST MC1000 User Manual

Bag Installation:
1. Insert a new bag into dock by sliding cardboard collar
under clamps until bag is fully inserted.
2. Insert tab of bag dock into wall brackets until locking tab
locks into place.

Cleaning/Replacing the Motor Filter:

1. Remove the bag dock to access the motor filter grill. Slide
motor filter grill up and out of the unit.
2. Remove motor filter from grill.
3. Wash motor filter with warm water without any additives.
Reinstall the filter after it has had time to thoroughly dry.
Note: If the filter is damaged, it should be discarded and
replaced with a new filter.
4. Replace the dry filter over the tabs in the motor filter grill.
1
10
2
3