Table of Contents
Advertisement
CAPTURING IMAGES
HINT
Adjusting the LCD monitor brightness
i While the Shooting Screen is active, You can quickly access the screen for
adjusting the brightness of the LCD monitor by pressing the MENU button
for at least 1 second.
Focus lock during video clip recording
i The autofocus can be set to a fixed focus during video clip recording if you
toggle the SET button up. When the autofocus is fixed, the p icon
appears on the LCD monitor.
i When the SET button is toggled up again, or the focus range setting
(page 66) is changed, the focus lock is released.
The data for a video clip is very large.
i Therefore, be aware that if the video clip is uploaded to a computer to be
played back, the computer may not be able to play back the video fast
enough, making it appear jerky. (The video will always be displayed
properly on the LCD monitor or a television.)
When the remaining card memory becomes 10 percent or less of the
total card capacity...
i The remaining memory icon appears on the LCD monitor.
i Depending on the card, shooting may end even before the possible
shooting time indicated.
CAUTION
During video clip playback, the sound of a motor is audible...
i During recording, the sound of the optical zoom movement or autofocus
movement was recorded. This is not a malfunction.
Downloaded From VideoCamera-Manual.com Manuals
35
English
Advertisement
Table of Contents
