Advertisement
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
With the ear buds in the 'Off' mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 7 seconds. After 2 seconds you will
hear the "Power On" voice prompt, and after another 5 seconds you will hear the
"Pairing" voice prompt and the LED indicator begins alternately flashing blue and red.
Release the Multi-Function Button (MFB)
Make sure that your Bluetooth device is turned 'On' and in the Pairing mode. Refer to
the instructions supplied with your device if necessary. When your device "finds" the
iB71 ear buds, you will see "iHome iB71" appear on your devices Bluetooth menu
screen together with the words "Not Paired", "Not Connected" or similar. Touch
"iHome iB71" to complete the pairing process. You will hear the voice prompt say
"Your device is connected", and you will see "iHome iB71 Connected" on your
devices Bluetooth menu. The LED indicator will slowly flash blue when you are
successfully paired. NOTE: If your Bluetooth device asks for a Password or a PIN to
complete the pairing process, enter "0000" on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device to
your iHome iB71 Bluetooth ear buds.
5. Using Your iHome FIT Bluetooth Ear Buds
The following chart explains the basic functions and operations of your Bluetooth ear buds.
Function
Turn Ear Buds 'On'
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Clear all paired devices
Turn Ear Buds Off
Action Required
When Ear Buds are 'Off Press and Hold the MFB for 2 seconds until you hear the
"Power On" voice prompt. The LED indicator flashes blue.
When Ear Buds are 'Off' Press and Hold the MFB for 7 seconds until you hear the
"Pairing" voice prompt and see the LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When iHome
iB71 appears on your device's menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback. Short
press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
Transfer a call between the phone and the ear buds While the call is in progress
double press the MFB to transfer the call between the phone and the ear buds.
When phone is paired with ear buds but no call is in progress double press the
MFB to redial the last number.
Press and hold both the "+" and the " – " buttons for 7 seconds.
Press and hold the MFB for 2 seconds until you hear the "Power Off" voice
prompt. The LED indicator flashes red and then shuts off.
3
Hide quick links:
Advertisement
