Charge The Battery - Philips Xenium W6610 Manual

Note:
•
SIM1/SIM2 both support 3G&2G network. Based on the
default settings of your phone, it will connect 3G network by
SIM1 directly. Also you can enter into
networks>Mobile networks>3G service
settings.
3
Replace the back cover.

Charge the battery

The battery is built-in and can not be took out. The
new phone is partially charged. The battery icon in
8 Getting started
Settings>Wireless &
to get your personal
the upper-right corner shows the battery level of
charging status.
Tips:
•
You can use the phone while it is charging.
•
Keeping the charger plugged to the mobile phone when the
battery is fully charged will not damage the battery. The only
way to turn off the charger is to unplug it, so it is advisable to
use an easily accessible power socket.
•
If a fully charged phone left unused, it will lost its charge over
time.
•
If the phone is being used for the first time or the phone has
not been used for a prolonged period, it may take longer time
to recharge.