Preparation For Servicing; How To Enter The Service Mode - Philips VR550 Service Manual

Video cassette recorder
Hide thumbs Also See for VR550:
Table of Contents

Advertisement

PREPARATION FOR SERVICING

How to Enter the Service Mode

About Optical Sensors
Caution:
An optical sensor system is used for the Tape Start
and End Sensors on this equipment. Carefully read
and follow the instructions below. Otherwise the unit
may operate erratically.
What to do for preparation
Insert a tape into the Deck Mechanism Assembly and
press the PLAY button. The tape will be loaded into
the Deck Mechanism Assembly. Make sure the power
is on, connect TP507 (S-INH) to GND. This will stop
the function of Tape Start Sensor, Tape End Sensor
and Reel Sensors. (If these TPs are connected before
plugging in the unit, the function of the sensors will
stay valid.) See Fig. 1.
Note: Because the Tape End Sensors are inactive, do
not run a tape all the way to the start or the end of the
tape to avoid tape damage.
Q504
Q505
TP507
S-INH
Fig. 1
1-4-1
HG470PFS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents