Changing The Lamp - Optoma EP 610 (H) Manual

English
22

Changing the lamp

The projection display will detect the lamp life itself. It will show you a warning
message when the lamp is used over working hours. When you see this message,
change the lamp as soon as possible.
Make sure the projection display has been cooled for at least 60 minutes before
changing the lamp.
Warning: Lamp compartment is hot! Allow it to cool before changing
!
lamps!
Lamp Changing Procedure:
1. Turn off the power and allow the projection display to cool down.
2. Disconnect the power cord.
3. Unscrew the 2 screws of the lamp cover and remove the cover.
Lamp Cover
Lamp Cover
Screws