Motion Settings - Samsung Galaxy S III User Manual

3. Tap next to the preferred TTS engine configure
the following settings:
• Language: allows you to set the language for spoken text.
• Settings for Google Text-to-speech Engine: allows you to
view Open Source Licenses.
• Settings for Samsung text-to-speech engine: allows you to
configure the General settings for the Samsung TTS.
• Install voice data: allows you to install voice data for speech
synthesis.
4. Configure the General options to alter the settings
associated with this feature:
• Speech rate: adjusts the rate at which on-screen text is
spoken by the device.
• Listen to an example: plays a short example of what the text-
to-speech feature sounds like on your device when activated.
Configuring the Mouse-TrackPad
This feature allows you to configure the pointer speed for a
connected mouse or trackpad.
1. From the main Settings page, tap My device tab
Language and input
2. Adjust the slider and tap OK.
Pointer speed.

Motion Settings

This feature allows you to assign specific functions to certain
phone actions that are detected by both the accelerometer
and gyroscope.
Caution! Excessive shaking or impact to the device may cause
unintended results. To learn how to properly control
motions, tap
Motion. When tapped, each entry comes with an
on-screen tutorial.
To activate motion:
1. From the Home screen, press
Settings
My device
My device
2. In a single motion touch and slide the Motion slider to
the right to turn it on.
Note: If Motion activation is not enabled, all motion services
are greyed-out and disabled.
(Apps) Settings My device tab
and then tap
(My device tab) Motion.
Changing Your Settings 272