Troubleshooting; What To Do If - AEG S74020KMX0 User Manual

12 www.aeg.com
7.5 Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Leave the door/doors open to
prevent unpleasant smells.
WARNING!
If the cabinet will be kept on,
ask somebody to check it
once in a while to prevent
the food inside from spoiling
in case of a power failure.

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

8.1 What to do if...

Problem
The appliance does not op-
erate.
The Alarm light flashes
The appliance is noisy.
Audible or visual alarm is on. The cabinet has been re-
7.6 Replacing the CLEANAIR
CONTROL filter
To get the best performance replace the
CLEANAIR CONTROL filter once every
year.
New active filters can be purchased from
your local dealer.
Refer to "Installation of the CLEANAIR
CONTROL filter" for instructions.
Possible cause
The appliance is switched
off.
The mains plug is not con-
nected to the mains socket
correctly.
There is no voltage in the
mains socket.
The temperature in the
freezer is too high.
The appliance is not sup-
ported properly.
cently switched on or the
temperature is still too
high.
The temperature in the ap-
pliance is too high.
The door is left open.
The air filter is a consumable
accessory and as such is not
covered by the guarantee.
Solution
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
Refer to 'High Temperature
Alarm.
Check if the appliance stands
stable.
Refer to "Door Open Alarm"or
"High Temperature Alarm".
Refer to "Door Open Alarm"or
"High Temperature Alarm".
Close the door.