Color Slow Shtr; Super Nightshot; Fader - Sony HDR-UX10 Operating Manual

®
Touch [r:::... •
.LI].
~.LI
flashes quickly. When the white
balance has been adjusted and stored in
the memory, the indicator stops
flashing.
" Notes
• Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool white
fluorescent lamps.
• When you select [ONE PUSH], keep shooting a
white object while
r:::... •
.LI
is flashing quickly.
• r:::... •
.LI
flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if
r:::... •
.LI
keeps
flashing after touching
10K
I,
set [WHITE BAL.]
to [AUTO].
• If you set [WHITE BAL.], [SCENE
SELECTION] is set to [AUTO].
.~.
Tips
• If you have changed the battery pack while
[AUTO] was selected, or bring your camcorder
outdoors from inside the house, or vice versa,
select [AUTO] and aim your camcorder at a
nearby white object for about 10 seconds for
better color balance adjustment.
• When the white balance has been set with [ONE
PUSH], if you change the [SCENE
SELECTION] settings, or bring your camcorder
outdoors from inside the house, or vice versa,
you need to redo the [ONE PUSH] procedure to
readjust the white balance.
COLOR SLOW SHTR
(Color Slow Shutter)
Q!J
When you set [COLOR SLOW SHTR] to
[ON],
[~J
appears, and you can record an
image brighter in color even in dark places.
To cancel [COLOR SLOW SHTR], touch
[OFF].
" Notes
• Adjust the focus manually ([FOCUS], p.
100)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
SUPER NIGHTSHOT
Q!J
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot
recording if you set [SUPER
NIGHTS HOT] to [ON] while the
NIGHTSHOT switch (p. 41) is also set to
ON.
S~
appears on the screen.
To return to the normal setting, set [SUPER
NIGHTSHOT] to [OFF].
" Notes
• Do not use [SUPER NIGHTSHOT] in bright
places. This may cause a malfunction.
• Do not cover the infrared port with your fingers
or other objects (p.
41).
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p.
100)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
FADER
D
You can record a transition with the
following effects adding to the interval
between scenes.
CD
Select the desired effect in [STBYl (to
fading in) or [REel (to fading out) mode,
then touch
lOKI.
®
Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step
CD.
If you press START/STOP, the setting is
canceled.
.....~
Fading out Fading in
•
c -,
=
en
-
Q
3
~:
::::s
=
'<
Q
=
. ..
n
QJ
3
n
Q
...
a.
CI»
...
Continued"
103