Dumping/Importing Data; Dumping Data; Importing Data - Optimus MD-1600 Owner's Manual

42-4043.fm Page 45 Tuesday, August 3, 1999 6:51 AM
(Local Control) (Default:
Local
On): set to on to send data simulta-
neously to the keyboard's speakers
and as MIDI data. Set to
send data only as MIDI data (the
speakers on the keyboard remain
silent).
(Accompaniment Out)
AcompOut
(Default: Off): set to on to send auto
accompaniment as MIDI data. Set to
to turn it off.
oFF
3. Within 5 seconds, use
change the setting of the parameter.
DUMPING/IMPORTING
DATA
The MD-1600's internal data, including
data recorded to memory and synthesiz-
er data, can be sent and received in bulk
as MIDI exclusive data through the MIDI
terminals. Thus, you can use a comput-
er or other MIDI device as an external
storage device.
First make connections from the
and terminals to an external
MIDI OUT
device using MIDI cables.
Note: Some software does not support
MIDI exclusive data.

Dumping Data

Follow these steps to dump data from
the keyboard to an external device.
1. Put the other device in its receive
standby mode.
See the Owner's Manual that comes
with the receiving device for details.
2. Repeatedly
oFF to
TUNE/MIDI
display shows
3. Within 5 seconds, press
data send.
MD-1600 automatically exits the
data transfer mode after all the data
is sent.
or to
+ –

Importing Data

Follow these steps to import dumped
data from another device.
1. Repeatedly
TUNE/MIDI
BulkSnd?
2. Within 5 seconds repeatedly press
BulkRcv?
3. Within 5 seconds, press
pare the keyboard to receive data.
4. Start the send operation on the
MIDI IN
sending device. See the manual that
comes with the connected device for
details. The MD-1600 automatically
exits the data transfer mode after all
the data is received.
press
TRANSPOSE/
on the MD-1600 until the
BulkSnd?
appears. The
Sending
press
TRANSPOSE/
so the display shows
.
or so the display shows
.
.
to start
to pre-
45