Using The Preset Auto-Rhythms; Selecting/Playing An Auto-Rhythm - Optimus MD-1200 Owner's Manual

42-4041.fm Page 15 Tuesday, August 3, 1999 6:56 AM
1. If the SPLIT or LAYER indicator is
on, press or
SPLIT
off.
2. Enter the number for the high-end
base tone on the keypad.
3. Press so the
SPLIT
appears.
4. Enter the number for the low-end
base tone.
5. Press so the
SPLIT
disappears.
6. Press so the
LAYER
tor appears.
7. Enter the number of the layered
tone for the high-end keys.
8. Press . The
SPLIT
appears.
9. Enter the number of the layered
tone for the low-end keys.
10. If desired, hold down
press the key where you want the
high-end tones to begin.
11. Play the keyboard to hear the
selected tones.
To cancel the SPLIT/LAYER combina-
tion, press each button so both the
SPLIT and LAYER
pear.
USING THE PRESET
AUTO-RHYTHMS
Your MD-1200 has 100 preset auto-
rhythms that provide a steady beat for
your music. The name and two-digit
number of each preset auto-rhythm is
to turn it marked to the left of the MD-1200's dis-
LAYER
play.
You can play a preset auto-rhythm on
the MD-1200 in any of these ways:
indicator
SPLIT
indicator
SPLIT
indica-
LAYER
indicator
SPLIT
and
SPLIT
Selecting/Playing an
Auto-Rhythm
indicators disap-
• Select and play a rhythm. See
"Selecting/Playing
Rhythm."
• Synchronize the start of a rhythm
with your music. See "Using SYN-
CHRO" on Page 16.
• Start a rhythm with a special intro-
duction. See "Using INTRO" on
Page 17.
• Stop a rhythm with a special ending.
See "Using ENDING" on Page 17.
• Briefly vary the pattern of a rhythm.
See "Using FILL-IN" on Page 17.
• Play an alternate version (variation)
of a rhythm. See "Using VARIA-
TION" on Page 17.
1. Press . RHYTHM
RHYTHM
name and number of the current
auto-rhythm appear on the display.
Note: The MD-1200 automatically
selects the rhythm CLUB POP (No.
00) the first time you turn it on. Each
time you turn it on after that, it
recalls the last selected rhythm.
an Auto-
and the
15