Configuring Local Area Network - D-Link DSL-2750U Quick Installation Manual

DSL-2750U/NRU

Configuring Local Area Network

1. Go to the Net / Connections page and select the LAN connection. If
needed, change the IP address and subnet mask for the LAN interface of
the router in the IP Address and Netmask fields of the IP settings
section. Then click the Save button.
By default, the DHCP server of the router is enabled. On the DHCP
2.
server tab you can change the parameters of the DHCP server. If you
want to manually assign IP addresses to devices of your LAN, disable the
DHCP server (select the Disable value from the Mode drop-down list).
After specifying the DHCP server settings, click the Save button.
3.
Quick Installation Guide
13