Specifications; Hot Surfaces; Important Safety Instructions - DeWalt D55394 Instruction Manual

Specifications

MoDEl
WEIGHt
HEIGHt
WIDtH
lEnGtH
AIr tAnk CAPACIty (GAllons)
APProX Cut-In PrEssurE
APProX. Cut-out PrEssurE
sCfM @ 100 PsI
noIsE lEVEl
*Tested per ISO 1217
+Tested per ISO 3744

Hot Surfaces

FIG. 2
AFTERCOOLER
D55394
208 lbs. (94.4 kg)
22.3" (566.4 mm)
24.2" (614.7 mm)
50" (1270 mm)
10.5 (39.7 liters)
120 psi
150 psi
*10.5
+78 dBA
PUMP CYLINDER
AND HEAD
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury.
CAUTION: Used without the safety alert symbol
indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS OR ANY D WALT TOOL, CALL US TOLL FREE AT:
e
1-800-4-D WAlt (1-800-433-9258)
e

Important Safety Instructions

WARNING: Do not operate this unit until you read and understand
this instruction manual for safety, operation and maintenance
instructions.
WARNING: This product contains chemicals known to the
State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
3