Scanning From The Automatic Document Feeder - Epson GT-10000+ Setup Manual

Scanning from the Automatic Document Feeder

The scanning instructions are divided into two sections; read
"Scanning a complete document" to scan an entire document or
image, or read "Scanning part of a document" to scan only a
certain part of an image or document.
Scanning a complete document
You do not need to use the preview feature when scanning a full
document or image. The scanner automatically finds and scans
the whole image. Follow the steps below to scan an image or
document.
1. Load the document in the Automatic Document Feeder.
2. Start the PageManager.
3. Select EPSON TWAIN Pro from Select Source of
PageManager's File menu.
4. Select Acquire from the File menu.
5. In the dialog box of EPSON TWAIN Pro or EPSON TWAIN
Pro Network, make sure that ADF-Single-sided or ADF-
Double-sided is selected from the Document Source list. Also
choose appropriate settings for the scanning.
6. Click Scan.
After scanning the entire stack of documents, a window with
thumb-nail images appears. In this window you can select and
change the orientation of the scanned images.
6
6-9
Options