Digital Effect; Program; Drive Level; Peak - Phonic Powerprod 1080 User Manual

DIGITAL EFFECT

Both PowerPod 1080 and PowerPod 1082 come
with built-in 16-preset digital effects: 1) M. Hall,
2) L. Hall, 3) S. CHURCH, 4) L. CHURCH, 5) S.
ROOM, 6) M. ROOM, 7) L. ROOM, 8) CHAM-
BER, 9) ECHO, 10) PLATE, 11) FLANGE, 12)
PAN REVB, 13) CHORUS 1, 14) CHORUS 2, 15)
COMBO 1, and 16) COMBO 2. Processed sig-
nal can be sent to MAIN L/R and MONITOR out-
put.
21 ON
Press this button activates the built-in digital ef-
fect; releasing it deactivate the effect. When ac-
tivated, signal from the DRIVE LEVEL 23 will
be sent to the DIGITAL EFFECT for effect pro-
cessing. There will be backlight coming on show-
ing which digital effect is in use when activated.
This button must be pressed and the DIGITAL
EFFECT must be on when taking advantage of
the FOOT SWITCH feature.
22

PROGRAM

This knob allows you to choose any of the 16-
PHONIC CORPORATION
preset digital effects. Numbers around the knob
represent the digital effect stated in the chart
above. There will be backlight coming on show-
ing which digital effect is in use.
23
Every channel strip contains a EFX knob 17 ,
which determines how much signal level is
routed to the DIGITAL EFFECT bus for optional
effect processing. Then the DRIVE LEVEL knob
determines the final input signal level to the ef-
fect processor. The DRIVE LEVEL knob also
affects the output level of the EFFECT OUT out-
put jack 5 .
24
This PEAK LED is for the DRIVE LEVEL. When
this LED lights up, user should be aware that
the signal level of the DRIVE LEVEL 23 is too
high. When it remains on or blinks constantly,
user could use both the LEVEL 19 and the
DRIVE LEVEL knob 23 in order to prevent pro-
cessed signal from distorting or losing definition.
POWERPOD1080/1082 USER' S MANUAL
DIGITAL EFFECT

DRIVE LEVEL

PEAK

Page 11