Cleaning Water Inlet Strainers - Bosch MAXX 5 Operating And Installation Instruction

Cleaning water inlet
strainers
Cleaning the strainer at the
water tap
Cleaning the strainer on the
washer dryer
Downloaded from www.Manualslib.com
This is necessary if very little or no water flows into the
washer dryer.
First, reduce the water pressure in the inlet hose:
q Turn off the tap.
q Turn the programme selector to any programme
q Press the
q Turn the programme selector to 0.
q Disconnect the hose from the water tap.
q Rinse the strainer under flowing water.
q Connect the hose.
q Disconnect the hose from the back of the
q Pull out the strainer and rinse under running water.
q Insert the strainer and reconnect the hose.
q Turn on the water tap and check whether water is
q Turn off the tap.
manuals search engine
(except B Spin / b Drain).
M
button, and allow the programme to
run for approx. 40 seconds.
washer dryer.
still discharged. If water is leaking, check that the
filter is correctly seated.
45