Table of Contents
Advertisement
D.2 MACHINE DISPOSAL
ATTENTION!
DISMANTLING OPERATIONS MUST BE CARRIED
OUT BY QUALIFIED PERSONNEL.
ATTENTION!
WORK ON THE ELECTRICAL EQUIPMENT MUST
ONLY BE CARRIED OUT BY A QUALIFIED
ELECTRICIAN, WITH THE POWER SUPPLY
DISCONNECTED.
D.2.1 WASTE STORAGE
At the end of the product's life-cycle, make sure it is not
dispersed in the environment. The doors must be removed
before scrapping the appliance.
Special waste materials can be stored temporarily while
awaiting treatment for disposal and/or permanent storage. In
any case, the current environmental protection laws in the
country of use must be observed.
D.2.2 PROCEDURE REGARDING APPLIANCE
DISMANTLING MACRO OPERATIONS
Before disposing of the machine, make sure to carefully check
its physical condition, and in particular any parts of the structure
that can give or break during scrapping. The machine's parts
must be disposed of in a differentiated way, according to their
different characteristics (e.g. metals, oils, greases, plastic,
rubber, etc.). Different regulations are in force in the various
countries, therefore comply with the provisions of the laws and
competent bodies in the country where scrapping takes place.
In general, the appliance must be taken to a specialised
collection/scrapping centre. Dismantle the appliance, grouping
the components according to their chemical characteristics,
remembering that the compressor contains lubricant oil and
refrigerant fluid which can be recycled, and that the refrigerator
components are special waste assimilable with urban waste.
The symbol
placed on the product indicates that it should
not be considered as domestic waste, but must be correctly
disposed of in order to prevent any negative consequences for
the environment and the health of people.
For further information on the recycling of this product, contact
the local dealer or agent, the after-sales assistance service or
the local body responsible for waste disposal.
ATTENTION!
Make the appliance unusable by removing the
power cable and any compartment closing
devices, to prevent the possibility of someone
becoming trapped inside.
ATTENTION!
When scrapping the machine, the "CE" marking,
this manual and other documents concerning the
appliance must be destroyed.
D.3 ENCLOSED DOCUMENTS
• Set of test and inspection documents
• Wiring diagram
• Installation diagram
40
Hide quick links:
Advertisement
Table of Contents
