Table of Contents
Advertisement
6.2.
Service Position
6.2.1.
Extension Cables for Service Position
Using the following Extension Cables, place the unit as shown for check and service.
Note :
1. The LCD open/close Switch is for changing between LCD Display or EVF Display. When turning on EVF Display, close the LCD
Shaft or place some paper or tape, etc. on LCD open/close Switch so that LCD open/close Switch stays ON.
2. To eject the DVD manually, slide the Lock lever on the Disc Cover Lock Unit for a short time or slide the EJECT switch.
3. Use a grounded ESD wrist strap while disassembling the Lens portion.
4. Connect the F.P.C.s to the connectors, verifying the direction of F.P.C.s.
The Main P.C.B. or a chip part will be damaged if the 60 Pin Extension Cable (LSUA0061) is misconnected.
5. Use extreme care when plugging in or unplugging connectors.
Caution
Laser light striking the eye may cause your eyesight
to be lost: For safety, be sure to remove any power
supply (AC adaptor/charger, battery, etc.) from the
DVD video camera/recorder before starting work.
<CSA requirement>
CAUTION: VISIBLE LASER RADIATION DO NOT
STARE INTO THE BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS CLASS 2M
Optical pickup
11
VDR-D210P / VDR-D220P / VDR-D230P / VDR-D210PC / VDR-D220PC / VDR-D230PC
Advertisement
Table of Contents
