WPS(PBC) Network Setup
■
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. Go to
Network Settings
→
Network
2. Select the
WPS(PBC)
then press
◀
3. Press the
WPS(PBC)
within 2 minutes. Your TV automatically
acquires all the network setting values it needs
and connects to your network.
4. The network connection screen appears, and network setup is done.
screen.
Network Settings
and press ENTERE,
ENTERE
again.
button on your router
→
(MENUm
→ ENTERE).
● The displayed image may differ depending on the
English
Network Settings
Select a network connection type.
Wired
Wireless(General)
Connect to the Access Point easily by pressing the
WPS(PBC)
WPS(PBC) button. Choose this if your Access Point
supports Push Button Configuration(PBC)
One Foot
Connection
U Move
model.
▶
E Enter
R Return