Recording
STANDBY/ON
ON
STANDBY
USB
Recording audio signals from external devices
1. Confirm the connections between the MB-
S1 and an external device to the HDD.
For details, see "Connecting the MB-S1" on pages 11 and 12.
2. Select an input source.
Press the EXTERNEL INPUT button repeatedly
EXTERNAL INPUT
DIGITAL-1: When connected to the DIGITAL
INPUT1 (OPTICAL) terminals
DIGITAL-2: When connected to the DIGITAL
INPUT2 (COAXIAL) terminals
ANALOG: When connected to the ANALOG
input terminals
3. Select a recording mode
(see the step 3 on page 24).
REC MODE
Press the REC MODE button to select the
desired recording mode. The recording mode
switches to the next one with each press of the
button.
For more information, see table on page 27.
REC MODE button
DISPLAY
TEXT
CD DUBBING
FAVORITE IT
HDD REC
REC MODE
EXTERNAL INPUT
HDD REC button
EXTERNAL INPUT
4. Put the MB-S1 into the recording standby
state.
HDD REC
Press the HDD REC button. The MB-S1 enters
the CD synchronous recording standby state.
The display area will change to
5. Select a target group for recording.
Press the HDD REC button again to select a
HDD REC
target group for recording. You can select
CURRENT or NEW for the target group.
CURRENT: The new recording will be added
to the end of the existing group containing
recorded tracks.
NEW: The new recording will be recorded as a
first track for a new group.
6. Start recording.
PLAY
/
PAUSE
Notice:
About maximum recording time
The maximum recording time is 18 hours per group. The recording
will be separated automatically into a track every one hour.
The recording time will be displayed up to 99 hours 59 minutes 59
seconds. When the recording lasts longer than the maximum time
above, the indication will be " -- : -- : -- ."
PLAY
/
PAUSE
MULTI JOG
PLAY MODE
EDIT/CLEAR
STOP
PLAY
/
PAUSE
MULTI JOG
YES
NO
MENU/EXIT
PLAY LIST
PUSH TO ENTER
OPERATION
C D
HDD
MB-S
1
HARD DISK MUSIC LIBRARY
.
PLAY
/
PAUSE
Press the
start playback on the external device
simultaneously.
button
button and
23
Need help?
Do you have a question about the MB-S1 and is the answer not in the manual?