Cutting Speed; Blade Maintenance - Toro 74433 Operator's Manual

Hide thumbs Also See for 74433:
Table of Contents

Advertisement

to maintain the same cutting height, which is a good
practice, mow more often in early spring. As the grass
growth rate slows in mid summer, mow less frequently.
If you cannot mow for an extended period, first mow
at a high cutting height; then mow again two days later
at a lower height setting.

Cutting Speed

To improve cut quality, use a slower ground speed.
Avoid Cutting Too Low
If the cutting width of the mower is wider than the
mower you previously used, raise the cutting height to
ensure that uneven turf is not cut too short.
Long Grass
If the grass is ever allowed to grow slightly longer than
normal, or if it contains a high degree of moisture, raise
the cutting height higher than usual and cut the grass at
this setting. Then cut the grass again using the lower,
normal setting.
When Stopping
If the machine's forward motion must be stopped while
mowing, a clump of grass clippings may drop onto your
lawn. To avoid this, move onto a previously cut area
with the blades engaged.
Keep the Underside of the Mower
Clean
Clean clippings and dirt from the underside of the
mower after each use. If grass and dirt build up inside
the mower, cutting quality will eventually become
unsatisfactory.

Blade Maintenance

Maintain a sharp blade throughout the cutting season
because a sharp blade cuts cleanly without tearing or
shredding the grass blades. Tearing and shredding turns
grass brown at the edges, which slows growth and
increases the chance of disease. Check the cutter blades
daily for sharpness, and for any wear or damage. File
down any nicks and sharpen the blades as necessary. If
a blade is damaged or worn, replace it immediately with
a genuine Toro replacement blade.
Safe Towing Practices
Tow only with a machine that has a hitch designed for
towing. Do not attach towed equipment except at the
hitch point. This product has a limited towing capacity
for small attachments, such as leaf sweepers, rollers up
to 500 lbs (227 kg) or carts up to 5 cubic feet (0.14 m
These types of attachments should be limited to flat
ground. Never allow children or others in or on towed
equipment. On slopes, the weight of towed equipment
may cause a loss of traction and control. Travel slowly
and allow extra distance to stop.
23
3
).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter zd420

Table of Contents