Brake System Messages; Compass Messages; Cruise Control Messages - Buick Envision 2017 Owner's Manual

TRANSPORT MODE ON
This message is displayed when the
vehicle is in transport mode. Some
features can be disabled while in
this mode, including Remote
Keyless Entry (RKE), remote start,
and the vehicle alarm system. Take
the vehicle to your dealer for service
to turn transport mode off.

Brake System Messages

BRAKE FLUID LOW
This message displays when the
brake fluid level is low. See Brake
Fluid 0 253.
RELEASE PARKING BRAKE
This message displays if the Electric
Parking Brake is on while the
vehicle is in motion. Release it
before attempting to drive. See
Electric Parking Brake 0 196.
SERVICE BRAKE ASSIST
This message displays when there
is a problem with the brake boost
system. When this message
displays, the brake pedal may be
harder to push and the stopping
distance may be longer. See your
dealer for service.
SERVICE PARKING BRAKE
This message displays when there
is a problem with the Electric
Parking Brake. See your dealer for
service.
STEP ON BRAKE TO
RELEASE PARK BRAKE
This message displays when
attempting to release the Electric
Parking Brake without the brake
pedal applied. See Electric Parking
Brake 0 196.

Compass Messages

Dashes may be displayed if the
vehicle temporarily loses
communication with the Global
Positioning System (GPS).
Instruments and Controls

Cruise Control Messages

ADAPTIVE CRUISE
DISENGAGING
This message displays when the
Adaptive Cruise Control (ACC) is
disengaging.
This may occur when:
The radar is not clean. Keep the
radar sensors free of mud, dirt,
snow, ice, and slush. Clean the
entire front and/or rear of the
vehicle. For cleaning
instructions, see Exterior
Care 0 299.
Heavy rain or snow is interfering
with the radar object detection or
camera performance.
Stability Control or Traction
Control has activated or been
disabled.
There is no traffic or other
objects to detect.
There is a fault in the system.
139