Page 1
SPEAKER STAND AS-140 Instruction Manual Thank you for purchasing the Onkyo speaker stand. Please read this manual thoroughly before using it. Keep this manual for future reference. Cautions 1. Be sure to tighten the screws when you assemble the speaker stands and attach the speaker stands to the speakers.
Page 2
Speaker Stand Assembly Onkyo recommends that you wire the speaker cables through the pipe stands. Insert one end of the speaker cable into the pipe stand from the pipe stand cover side. Be sure to insert the cable from the pipe stand cover side.
Page 3
Remove the adhesive tape that you attached in Step 1. (1) Insert the hook on the pipe stand into the key hole on the speaker’s rear panel, then (2) press and slide the speaker downward. (2) Press and slide the speaker downward.
Page 4
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ SN 29344872 (C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved. HOMEPAGE http://www.onkyo.com/ I0807-1 * 2 9 3 4 4 8 7 2 *...