Auto Detection - D-Link DIR-842 User Manual

Section 4 - Configuration
Auto Detection mode (not Auto-Configuration mode) automatically detects IPv6 the connection method used by your Internet Service Provider
(ISP). If your ISP provides an IPv6 service and Auto Detection failed to detect it, the user must manually select another IPv6 connection type (such
as PPPoE, Auto Configuration, 6rd, DS-Lite etc.)
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
Primary DNS If you selected Use the following DNS address above, enter the
Server: primary DNS server address.
Secondary DNS If you selected Use the following DNS address above, enter the
Server: secondary DNS server address.
Enable DHCP- Enable or disable prefix delegation services.
PD:
LAN IPv6 If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
Address: router.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
Enable Enable or disable the Automatic IPv6 Address Assignment feature.
Automatic
IPv6 Address
Assignment:
Enable Enable or disable DHCP-PD for other IPv6 routers connected to the
Automatic LAN interface.
DHCP-PD in
LAN:
Note: This feature requires a smaller subnet prefix than /64 (i.e.
allowing for a larger address allocation), such as /63. Contact your
ISP for more information.
D-Link DIR-842 User Manual

Auto Detection

33