Philips 22HFL3331D/10 User Manual page 31

[Low power standby (Green / Fast)]
Defines the power mode when TV enters to
standby by pressing remote control power button
or TV local power button.
• [Fast]: When set, the TV will enter semi-
standby mode to achieve fast powering
up.
[Green]:
• When set, the TV will enter
low standby power mode to achieve
minimum power consumption.
[Power on]
The power on function allows the TV to enter a
specific mode ([On], [Standby], or [Last status])
of operation after the mains power is activated.
• [On]: When set, the TV will always turn
on after the mains power is activated.
[Standby]:
•
turn to standby after the mains power is
activated.
• [Last status]:
always turn to the last status (either On
or Standby) whenever the mains power
is activated.
[Smart power]
Adjusts the picture backlight to achieve the
following power saving mode.
• [Off]: Smart power is disabled. ( Vivid
mode is applied).
[Low]:
• The picture backlight is at low
power saving mode. (Movie mode is
applied).
• [Medium]:
medium power saving mode. (Standard
mode is applied).
[High]:
• The picture backlight is at high
power savings (Energy saving mode is
applied).
[Display message]
[Off]:
• Disables the display of the
welcome message.
[On]:
• Enables the display of the welcome
message for a pre-defined time after the
TV turns on from standby or off.
Downloaded From TV-Manual.com Manuals
When set, the TV will always
When set, the TV will
The picture backlight is at
Note
Selects [Welcome message] ≥ [Message
•
time-out] to set the period of time to
display the welcome message.
[Set ID]
(Only available in [Signage] mode). This function
allows installer to designate a serial ID number for
each TV. Through the ID number, the installer can
control each TV by using RS232-device-chaining.
Switch on volume
When the guest switches the TV on, it will play at
the specified volume level.
[Last status] : If [On] is selected, the TV
•
will be automatically switched to the
last volume status whenever the mains
power is turned on. (The volume level
can not exceed the [Maximum volume]
level).
[User defined]
•
select [Last status] ≥ [Off]. )The guest
can adjust his/her preferred switch on
volume level.
Switch on channel
When the guest switches the TV on, it will play at
the specified channel.
[Last status] : If [On] is selected, the TV
•
will be automatically switched to the
last channel status whenever the mains
power is turned on.
• [User defined]
select [Last status] ≥ [Off]). The guest
can choose his/her preferred switch on
channel.
: (Only appears when you
: (Only appears when you
EN
29