Sony KDL-40XBR2 Service Manual page 46

The screen displays the fi rst category in the selected service menu.
4. To change the category, press 2 or 5 on the Remote Commander.
Note: Pressing 2 or 5 only changes the categories within the service menu displayed. To change a category on one of the other service menus,
press the JUMP button until the correct service menu is displayed.
5. To change the adjustment item, press 1 or 4 on the Remote Commander.
6. To change the data value, press 3 or 6 on the Remote Commander.
Note: To go back to the last saved data value, press 0 then ENT on the Remote Commander to read the memory.
7. To write into memory, press MUTING then ENT on the Remote Commander.
8. To exit service mode, turn the power off.
KDL-40XBR2/46XBR2
Next item
1
Next
2
Category
Previous
4
item
8
Restore User Control
and Channel Memory
JUMP
Displays Service Menus
MUTING
Write into
memory
TV POWER
3 Increase
Data value
6 Decrease
Data value
5 Previous
Category
ENT
0
Read data
from last
saved NVM
RM-YD010
KDL-40XBR2/46XBR2
46