Using The Conferencing Unit; Switch The Cordless Audio Conferencing Unit On / Off; Calls; Make A Call - Motorola AC1000 User Manual

3. Using the conferencing unit

NOTE
Your cordless audio conferencing unit will automatically time the duration of all external
calls, the call timer will display on the screen. When the call ends, the total duration of your
talk time is shown for 2 seconds.
3.1

Switch the cordless audio conferencing unit on / off

e
1. Press and hold
3.2

Calls

3.2.1

Make a call

t
1. Press .
2. When you hear the dial tone, dial the number.
3.2.2

Preparatory dialling

1. Dial the number first. If you make a mistake press
t
2. Press , to dial the number.
NOTE
To enter a pause (P) when pre-dialling, see page 18.
3.2.3

Make a call using fast call keys

1. Press and hold the relevant keypad number to dial the pre-stored number directly.
NOTE
To store a fast call number, see page 21.
3.2.4

End a call

e
Press , or if Auto End Calls is set to On, place the cordless audio conferencing unit back
on the base.
3.2.5

Receive a call

When you receive an external call, the phone rings and the phone number or name shows
on the display.
t
1. Press to answer the call.
NOTE
If you prefer to simply lift up the cordless audio conferencing unit to answer a call, you will
need to switch Auto Answer on, see page 30.
3.3

Adjust the speaker volume

u
During a call, press
choose from.
14
to switch the cordless audio conferencing unit on or off.
d
or to increase or decrease the volume. There are 8 levels to
Clear to delete the last digit.
Using the conferencing unit