Names Of Parts And Their Functions - Yamaha TSX-14 Owner's Manual

NAMES OF PARTS AND THEIR FUNCTIONS

■ Top panel
A Grille (☞ page 3)
B Display
C Indicators
(Alarm): Lights when the
alarm function is on
(☞ page 4).
RADIO: Lights when the radio is
selected as an input
source (☞ page 6).
AUX: Lights when AUX is selected
as an input source
(☞ page 8).
iPod: Lights when iPod is selected
as an input source
(☞ page 7).
y
Dimmer function
Press CLOCK repeatedly to set the
brightness of the display and
indicators.
3 (brightest) 2 1 (darkest)
2
En
E iPod dock
Set your iPod on the Lightning connector
of the iPod dock.
y
An iPod is charged when set in the
iPod dock.
Note
• The iPod may not be set in the
iPod dock securely if it is in its
protective case.
• This unit stops supplying power when it is in Eco
Standby mode.
D
Press to turn on the system or enter standby mode.
Eco Standby mode
• This can reduce power consumption. Press and hold
3 seconds to set the system to power saving mode. All the indicators and
display turn off, and audio playback and input via buttons except
disabled. To cancel Eco Standby mode, press
• Even in standby mode or Eco Standby mode, the alarm function is
available.
Auto Standby (☞ page 5)
• This unit has a function that automatically activates standby mode when no
audio signal is input from a connecting device, or when the connecting
device is playing at a low volume for a certain period (about 20 minutes).
F VOLUME
Controls volume. When you control the
volume, the volume level will be displayed on
the display for a while.
G CLOCK
Sets the clock (☞ page 4).
H ALARM
Sets the alarm (☞ page 4).
I TUNING
Adjust the time or radio frequency
(☞ page 4, 6).
J PRESET
Stores up to five favorite FM radio stations
(☞ page 6).
K SOURCE
Selects an input source from iPod, AUX, or
RADIO.
.
for more than
are