Advertisement

Quick Links

1800 Power Curve
Model No. 38302—Serial No. 314000001 and Up
If, after carefully reading this manual, you still have questions or
problems, call toll free 1-800-808-2963 (US) or 1-800-808-3072 (Canada)
before returning this product.
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should
always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING THIS APPLIANCE
WARNING
To reduce the risk of fire, electric
shock, or injury, follow these safety instructions.
It is essential that you or any other operator of the appliance
read and understand the contents of this manual before operating
the appliance. Pay particular attention to the safety alert symbol
which means CAUTION, WARNING, or DANGER—personal
safety instruction. Read and understand the instruction because it
has to do with safety. Failure to comply with these instructions
may result in personal injury, risk of fire, or electrical shock.
Do not use the appliance on graveled surface.
Keep children, pets, and bystanders away—All visitors should
be kept at a distance from the work area.
Dress properly—Do not wear loose clothing or jewelry. They
can be caught in moving parts.
Wear rubber boots when operating the appliance.
Operating the appliance in the hand-held position is unsafe.
Warning—To prevent electric shock, use the appliance only with
an extension cord suitable for outdoor use.
Extension cords—To prevent the appliance cord and the
extension cord from disconnecting during operation, connect the
extension cord to the appliance as shown in Figure 9.
Avoid accidental starting—Do not carry the appliance with your
finger on the switch. Ensure that the switch is off when plugging in
the appliance.
Do not abuse the cord—Never carry the appliance by its cord or
yank on the extension cord to disconnect the appliance from the
receptacle. Keep the cord from heat, oil, and sharp edges.
Keep hands away from moving parts.
Keep guards in place and in working order.
Do not force the appliance—It will perform better and safer at
the rate for which it was designed.
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Snowthrower
Do not overreach—Watch your footing and keep your balance
at all times.
If the appliance strikes a foreign object, follow these steps:
Disconnect the appliance—Disconnect the appliance from the
power supply when not in use, before servicing, when changing
accessories, etc.
Store an idle appliance indoors. When the appliance is not in
use, it should be stored indoors in a dry, secured place out of the
reach of children.
Maintain the appliance with care—Follow instructions for
changing accessories.
This appliance meets or exceeds the B71.3 specifications
of the American National Standards Institute in effect at the
time of production.
Read and understand the contents of this manual before you
start the motor.
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Improperly using or maintaining this appliance could result
in injury or death. To reduce this potential, comply with the
following safety instructions.
This appliance is capable of amputating hands and feet and
of throwing objects. Failure to observe the following safety
instructions could result in serious injury.
Training
Register at www.Toro.com.
Immediately release the control bar to stop the appliance.
Unplug the power cord.
Inspect for damage.
Repair any damage before starting and operating the
appliance.
This is the safety alert symbol. It is used to alert you to
Read, understand, and follow all instructions on the appliance
and in the manual(s) before operating this appliance. Be
thoroughly familiar with all the controls and the proper use of
the appliance. Know how to stop the appliance and disengage
the controls quickly.
Never allow children to operate the appliance. Never allow
adults to operate the appliance without proper instruction.
Keep the area of operation clear of all persons, particularly
small children and pets.
Exercise caution to avoid slipping or falling when operating
on slippery surfaces and at high speeds.
Original Instructions (EN)
All Rights Reserved *3378-486* A
Printed in the USA
Form No. 3378-486 Rev A
Operator's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Toro 38302

  • Page 1: Important Safety Instructions

    Form No. 3378-486 Rev A 1800 Power Curve ® Snowthrower Model No. 38302—Serial No. 314000001 and Up Operator's Manual If, after carefully reading this manual, you still have questions or problems, call toll free 1-800-808-2963 (US) or 1-800-808-3072 (Canada) before returning this product.
  • Page 2: Clearing A Clogged Discharge Chute

    Always be sure of your footing, and keep a firm hold on the handle. Walk; never run. • Disengage power to the impeller when the machine is being transported or not in use. • Only use Toro-approved attachments and accessories.
  • Page 3: Safety And Instructional Decals

    Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or lost. 125–0528 1. Warning—read the 3. Cutting/dismemberment Operator’s Manual. hazard, rotor—stay away from moving parts, keep all guards and shields in place;...
  • Page 4: Installing The Upper Handle

    Setup Note: Determine the left and right sides of the machine from the normal operating position. Installing the Upper Handle 1. Remove the handle knobs, oval bolts, and curved washers from the lower handle. Figure 2 2. Install the upper handle to the lower handle of the machine with the handle knobs, curved washers, and oval bolts as 1.
  • Page 5 Figure 4 1. Keyed hole 2. Bracket 3. Remove the decal that covers the keyed hole in the back of the housing (Figure 5). Figure 6 1. Handle on the chute control rod 5. Firmly push the rod into the keyed hole in the back of the housing until it snaps into place.
  • Page 6: Connecting To Power Source

    Operation DANGER Contact with water while operating the machine could cause electric shock, causing injury or death. Product Overview • Don't handle the plug or the machine with wet hands or while standing in water. • Use only an extension cord recommended for outdoor cold-weather use.
  • Page 7: Starting And Stopping The Motor

    Starting and Stopping the Motor 1. To start the motor, insert the interlock key, press and hold the interlock button, and squeeze the power control bar to the handle (Figure 10). Figure 11 1. Chute deflector trigger G017930 Figure 10 WARNING A gap between the discharge chute and the chute 1.
  • Page 8: Maintenance

    Maintenance WARNING When using the discharge chute handle, never Important: All electrical repairs should be performed by an direct the snow discharge chute at the operator or Authorized Service Dealer only. bystanders. The machine can throw objects and cause serious personal injury. Note: Determine the left and right sides of the machine from the normal operating position.
  • Page 9: Replacing The Rotor

    6. Install the right side plate with the screws that you removed in step 1. Service Toro has designed this machine to give you years of trouble-free use. Should it need service, bring the machine to an Authorized Toro Service Dealer, who is specially trained to repair Toro products and will ensure that your Toro stays “all”...
  • Page 10: Double-Insulated Appliances

    Storage Toro Service Dealer, who is specially trained to repair Toro products and will ensure that your Toro stays “all” Toro. 1. Run the machine for a few minutes and wipe away any Double-insulated Appliances melted snow on the machine.
  • Page 11 The Way Toro Uses Information Toro may use your personal information to process warranty claims, to contact you in the event of a product recall and for any other purpose which we tell you about. Toro may share your information with Toro's affiliates, dealers or other business partners in connection with any of these activities. We will not sell your personal information to any other company.
  • Page 12 Toro's option, under warranty at no cost for parts the Operator's Manual have been performed.

This manual is also suitable for:

1800 power curve

Table of Contents