Page of 4
Download Bookmark Comment

One for All URC 4700 User Manual

One for all universal remote user manual.
URC 4700
Access 4
User Manual
Overview
Thank you for purchasing the One For
All
®
Access 4™ universal remote
control. Before you can use your new
remote, you will need to program it to
operate the specific home entertain-
ment components you wish to control.
Follow the instructions detailed in this
manual to set up your One For All
Access 4 and enjoy your new remote
control.
Features and Functions
The illustration below and the chart
immediately after describe the features
and functions of the One For All
Access 4 universal remote control. Use
the drawing to locate each key on the
remote, then refer to the chart for a
description of the corresponding
function each key performs.
POWER
AUX
CBL
VCR
TV
CH
+
VOL –
VOL
CH
REW
PLAY
FF
VCR CONTROL
STOP
REC
PAUSE
TV/VCR
ENTER
Feature – Function
The Red Light (LED)
flashes red to show that the
remote is working.
The function of GLOW keys
: VOL-/+, CH
/
and
DIGIT keys are shown below :
The VOL +/- (Volume Up/
VOL
+
VOL —
Down) operate the
VOLUME UP/DOWN of
your home entertainment
components.
The CH
/
(Channel Up/
CH
Down) keys operate the
CHANNEL UP/DOWN
CH
feature of your home
entertainment components.
The DIGIT keys (0-9)
operate the same as the
digit keys on your original
remote.
These GLOW keys are
made of a phosphorescent
material that Glows-in-the-
dark. To activate the
"GLOW" Feature, you must
expose the GLOW Keys to
bright light. The lenght of
time the GLOW Keys
remain illuminated will be
determined by the lenght of
time the remote is exposed
to bright light.
The MUTE key operates the
same as the MUTE key on
your original remote.
The SETUP key is used to
program your One For All
Access 4 .
The POWER key operates
POWER
the POWER ON and OFF
for your TV, VCR and Cable
Converter.
The RECALL key operates
the PREVIOUS CHANNEL
or LAST CHANNEL
RECALL feature of your TV,
VCR and Cable Converter.
Please note that most
VCRs do not have a LAST
or PREVIOUS CHANNEL
feature. If this is the case
with your VCR, then
RECALL will not have any
function in the VCR mode.
The SLEEP key accesses
the sleep function of your
TV or Cable Converter,
provided the component
has a SLEEP TIMER
function.
The TV, VCR, CBL, and
TV
VCR
AUX keys are used to
select the home entertain-
CBL
AUX
ment component you want
to control.
The ENTER key operates
ENTER
the same as the ENTER
key on your original remote.
The REC (Record), PAUSE,
REC
PAUSE
REW (Rewind), PLAY, FF
(Fast Forward), STOP and
REW
TV/VCR operate the same
as the keys on your original
PLAY
VCR remote. As a safety
feature on the One For All
FF
STOP
Access 4 , you must press
the REC key twice.
TV/VCR
Installing the Batteries
Your One For All Access 4 requires
four (4) new AAA alkaline batteries.
To install the batteries:
On the back of the One For
1.
All Access 4 , pull back on
the tab and lift the battery
cover off.
2.
Match the + and - marks on
the batteries to the + and -
marks in the battery case,
then insert the batteries.
3.
Press the battery cover
back into place.
4.
Test the unit by pressing
POWER
POWER. If the batteries are
inserted correctly, the red
light (LED) will blink once.
NOTE: Removing the batteries for
more than 15 minutes will require you
to reprogram your remote.
Setting Up Your Components
Programming the One For All
Access 4 to operate your TV:
Locate the brand name of your TV and
then write it in the space below.
TV Brand: _____________________
Locate the brand name of your TV in the
"SETUP CODES FOR TVs" section. The
brands are listed in alphabetical order
with the most popular codes listed first.
You will use one of these codes to
program your One For All Access 4 to
operate your TV.
To program the One For All Access 4
to operate your TV:
1.
Turn on your TV.
2.
Press TV and release.
TV
Press and hold SETUP until
the One For All Access 4's
red light blinks twice, then
release SETUP.
3.
Enter the first four-digit TV
code listed for your brand in
the "SETUP CODES FOR
TVs" section. If you perform
this procedure correctly, the
red light will blink twice
when you enter the final
digit of your code.
4.
Aim the One For All Access
POWER
4 at your TV and press
POWER. Your TV should
turn off. If your TV does not
respond, repeat steps 2-4,
trying each code listed for
your brand until you find the
one that operates your TV.
5.
Your One For All Access 4
is now programmed to
operate your TV. Write your
TV code in the boxes to the
left for future reference.
Remember, if you want to use your
One For All Access 4 to operate your
TV, press the TV key first.
SETUP CODES FOR TVs
A-Mark
0003
AOC
0019, 0030, 0052, 0003,
0137, 0185
Abex
0032
Admiral
0093, 0165, 0179, 0180,
0016, 0047
Adventura
0046
Aiko
0092
Akai
0030, 0098
Alaron
0179, 0183, 0216
Ambassador
0177
Anam
0180, 0068
Anam National
0055
Archer
0003
Astro Text
0379
Audiovox
0003, 0180
Baysonic
0180
Belcor
0019
Bell & Howell
0154, 0016
Bradford
0180
Brockwood
0019
Broksonic
0003
CCE
0217, 0329
CXC
0180
Candle
0030, 0056, 0186, 0046
Carnivale
0030
Carver
0054, 0170
Celebrity
0000
Cineral
0451, 0092
Citizen
0030, 0056, 0060, 0092,
0186, 0280, 0561, 0039,
0046
Clairtone
0185
Concerto
0056
Contec
0180, 0185, 0158, 0157
Craig
0180
Crown
0180, 0039
Curtis Mathes
0030, 0060, 0154, 0039
Daewoo
0092, 0451, 0019, 0039,
0091
Daytron
0019
Denon
0145
Dumont
0017, 0019
Electroband
0000, 0185
Electrohome
0381, 0389, 0409
Emerson
0236, 0463, 0019, 0154,
0177, 0178, 0179, 0180,
0181, 0182, 0183, 0185,
0270, 0280, 0282, 0158,
0038, 0039
Envision
0030
Fisher
0154, 0159
Fujitsu
0179
Funai
0171, 0179, 0180
Futuretech
0180
GE
0047, 0051, 0055, 0451,
0021, 0027, 0029, 0178,
0279, 0282, 0135, 0174
Gibralter
0017, 0019, 0030
Goldstar
0019, 0030, 0178, 0409,
0001, 0002, 0032, 0039,
0106
Gradiente
0053, 0056, 0170, 0392
Grunpy
0179, 0180
Hallmark
0178
Harman/Kardon
0078
Harvard
0180, 0068
Hitachi
0145, 0151, 0056, 0409,
0413, 0038, 0279, 0032
Infinity
0054
JBL
0054
JCB
0000
JVC
0053, 0036, 0069, 0160,
0169, 0182
Janeil
0046
KEC
0180
KMC
0106
KTV
0030, 0180, 0183, 0185,
0217, 0280, 0039
Kamp
0216
Kawasho
0158, 0216
Kaypani
0052
Kenwood
0019, 0030
Kloss
0024, 0046, 0078
LG0056
LXI
0047, 0054, 0154, 0156,
0178, 0148
Logik
0016
Luxman
0056
MEI
0185
MGA
0150, 0155, 0019, 0030,
0178
MTC
0019, 0030, 0056, 0060,
0091, 0185, 0216
Magnavox
0054, 0096, 0186, 0187,
0030, 0020, 0024, 0028,
0036, 0230, 0386, 0171,
0179
Majestic
0016, 0015
Marantz
0054, 0030
Matsushita
0250
Megatron
0178, 0003, 0145
Memorex
0150, 0154, 0056, 0178,
0016, 0106
Midland
0047, 0051, 0017, 0135,
0032, 0039
Minutz
0021
Mitsubishi
0150, 0155, 0093, 0178,
0019, 0098, 0241
Motorola
0093, 0055
Multitech
0180, 0217
NAD
0156, 0166, 0178
NEC
0019, 0030, 0056, 0036,
0170
NTC
0092
Nikko
0030, 0092, 0178
Noblex
0430
Noshi
0018
Onwa
0180
Optimus
0154, 0166, 0250
Optonica
0093, 0165
Orion
0236
Panasonic
0250, 0051, 0055, 0162,
0226, 0338
Penney
0047, 0156, 0060, 0178,
0018, 0019, 0021, 0027,
0030, 0051, 0149, 0002,
0003, 0135, 0032, 0039
Philco
0054, 0096, 0145, 0030,
0019, 0020, 0028
Philips
0054
Pilot
0019, 0030, 0039
Pioneer
0166, 0038
Portland
0092, 0019, 0039
Prism
0051
Proscan
0047
Proton
0466, 0178, 0003, 0052
Pulsar
0017, 0019
Quasar
0250, 0051, 0055, 0165

   Related Manuals for One for All URC 4700

   Summary of Contents for One for All URC 4700

  • Page 1

    POWER Follow the instructions detailed in this manual to set up your One For All Access 4 and enjoy your new remote control. Features and Functions The illustration below and the chart...

  • Page 2

    0178, 0179, 0180, 0186 Spectricon 0003, 0137 Squareview 0171 Remember, if you want to use your Starlite 0180 One For All Access 4 to operate your Supre-Macy 0046 VCR, press the VCR key first. Supreme 0000 Sylvania 0054, 0096, 0020, 0028,...

  • Page 3

    SETUP. One For All Access 4 Enter the first four-digit TV If you have set up the One For All code listed for your brand in Access 4 using the “Searching For the “SETUP CODES FOR Your Code”...

  • Page 4

    This product has been discontinued and is no longer supported. One For All (“OFA”) warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase.

Comments to this Manuals

Symbols: 0
Latest comments: