Panasonic DMR-BWT460 Operating Instructions Manual page 65

Deep Colour Output
Deep Colour output when a TV that supports
Deep Colour is connected.
HDMI Audio Output
Select "Off" when connected to an amplifier/
receiver with a DIGITAL AUDIO OUT terminal.
• To enjoy BD-Video that supports
DTS:X
TM
Connect this unit to an AV amplifier or similar device
that
supports it with an HDMI cable, and select the
following settings:
- Dolby D / Dolby D + / Dolby TrueHD: "Bitstream"
- DTS / DTS-HD: "Bitstream"
- BD-Video Secondary Audio: "Off"
Dolby Atmos is a trademark of Dolby Laboratories.
Contents Type Flag
If "Automatic" is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select "Off" when you do not want to use
VIERA Link.
Network
Easy Network Setting
Press [OK] to start Easy Network Setting. (
Network Settings
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
• To set the IP address and DNS
1 Set "IP Address Auto-Assignment" and
"DNS-IP Auto-Assignment" to "Off".
2 Select the item, then press [OK] to show
the respective setting.
• When the router's DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the "IP
Address" and assign the same number for
"Subnet Mask" and "Gateway Address".
Dolby Atmos or
R
Others
Standby Settings
12)
Proxy Server Settings
Check and set the connection to the Proxy
server.
• Press [OK] to show the respective setting.
Notice
Displays the terms of service for the cloud
services.
• You must agree to the terms of use for the
Internet function and the privacy policy.
Quick Start
• On:
It is possible to start quickly from standby mode.
• Off:
Power consumption in standby mode is
minimized. ( 72)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
"Quick Start" is activated when the set time
comes.
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When "REWIND LIVE TV" is set to "On"
( 62), "Off" cannot be selected.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing "Automatic Stop" or
"Recording Time" (
Automatic Standby after Copy
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (
media other than HDD with Video Menu,
42, Copying titles with copying list).
22).
41, Copying from
65
SQT1111