Installing The Batteries; The Keypad; Picture Of One For All Tv Remote - One for All Univeral Remote Instruction Manual

Your ONE FOR ALL needs 2 new "AA/LR6" alkaline batteries.
1 Remove the battery cover from the back of your ONE FOR ALL by
pressing down on the tab.
2 Match the batteries to the + and - marks inside the battery case,
then insert the batteries.
3 Press the battery cover back into place.
Important notes:
- In order to avoid having to reprogram your ONE FOR ALL after
you remove the batteries, you will need to insert new batteries
within 5 minutes. Also it is best that you do not use rechargable
batteries.
- On the inside of the battery compartment door you will find a
label on which to write your Set-Up code after your ONE FOR ALL
is set up for your device. Please write down your code for easy,
future reference.
See picture of ONE FOR ALL TV remote on page 3
1
MAGIC Key
The MAGIC key is used to set up your ONE FOR ALL 4.
2
POWER
The POWER key operates the same function it did on your original
remote control. The red light (LED - Light Emitting Diode)
underneath the POWER key will light up every time a key
is pressed.
3
MENU Key
The MENU key controls the same function as it did on your original
remote.
4
DIRECTIONAL KEYS
If available on your original remote, these keys will allow you to
navigate through the menu mode of your device.
5
OK
The OK key will confirm your choice in menu operation.
6
Programme (Channel) +/- Keys
These keys operate in the same way as the keys on your original
remote.
7
MUTE Key
The Mute key operates the same function it did on your orginal
remote control.
8
Volume +/- Keys
These keys operate in the same way as the keys on your original
remote.
WWW.ONEFORALL.COM

Installing the Batteries

The Keypad

4