Table of Contents
Advertisement
OFA Kameleon wRF UG rev 3.fm Page 54 Monday, September 13, 2004 11:18 AM
K
AMELEON
TROUBLESHOOTING
PROBLEM:
No display at all times.
SOLUTION:
Replace batteries with four new AA alkaline batteries.
PROBLEM:
The bottom two IR indicator segments are flashing.
SOLUTION:
Replace batteries with four new AA alkaline batteries.
PROBLEM:
No display when programming.
SOLUTION:
Display has turned off due to inactivity. Start programming
again and do not pause while performing instructions.
PROBLEM:
During programming, the two bottom IR segments display
a long flash.
SOLUTION:
An invalid entry has occurred. Check the keys to be pressed
and start program again.
PROBLEM:
How do I stop programming?
Press HOME once to return to the Program Keys screen.
SOLUTION:
Press HOME once more to exit completely.
PROBLEM:
The unit does not control home entertainment devices or
commands are not working properly.
SOLUTION:
Try all listed codes for the device brands being set up.Make
sure they can be operated with an infrared remote control.
PROBLEM:
Tried Searching For Your Code method and still could not
find a working code.
SOLUTION:
Perform Restoring Factory Default Settings on page 40. Then
repeat Searching For Your Code on page 19.
PROBLEM:
Cannot program a macro onto M1 – M4 or POWER keys.
SOLUTION:
Make sure the total number of key presses being
programmed is less than 15.
PROBLEM:
Power macro does not execute.
SOLUTION:
First, press the Home Theater key once, then press POWER
once.
54
8-D
R
EVICE
EMOTE WITH
RF
Troubleshooting
Advertisement
Table of Contents
