Regulatory Information; Power Supply - Symbol WS 2000 Quick Installation Manual

42 WS 2000 Quick Installation Guide
All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled
as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol
Technologies, could void the user's authority to operate the equipment.
Country Approvals
A regulatory label is applied to signify the AP 100 Access Port is approved for use in the following countries: United States,
Canada, Australia, Japan, and Europe.
Europe includes: Austria, Belgium, Croatia, Czech Republic, Croatia, Cyprus, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland, and the United Kingdom.
In addition to the list above, other countries may require a regulatory stamp to be affixed to the product. Please refer to
http://www.symbol.com/wireless/
For countries that require a regulatory label, a sheet of stamps may be enclosed within the package. If the appropriate stamp
is not provided, please contact your supplier.
To apply the country stamp:
1. Peel the stamp appropriate to the country where this device is to be used.
2. Apply the country stamp in the space provided on the regulatory label.
Operation of the device without a regulatory label or the correct country stamp is
illegal.

Power Supply

Use only a Symbol-approved power supply output rated 48VDC. The power supply is certified to
EN60950 with SELV outputs.

Regulatory Information

for the list of countries where mandatory stamps are required.