Table of Contents
Advertisement
Configuring the Router
You can select two methods to configure your new router. The first method is by using D-Link
Click'n Connect Utility, which is included on the CD designed to run on Windows XP/2000. Just
follow the instructions step by step to configure your router for Internet access for the first time.
The second method is to use your Web browser to access the built in web server pages used to
setup the Router, your computer must be configured to "Obtain an IP address automatically", that
is, you must change the IP network settings of your computer so that it is a DHCP Client. If you
are using Windows XP and do not know how to change your network settings, skip ahead to
Appendix and read the instructions provided. You may also read the User Manual for instructions
on changing IP settings for computers running Windows operating systems.
To connect to the network, make sure the network adapter in your computer is configured properly.
Read the Appendix at the end of this guide to read how to configure the network adapter to obtain
an IP address automatically using Windows XP.
3
Open your Web browser
and type
"http://192.168.1.1"
into the
URL address box. Then press
the
Enter
or
Return
key.
The login prompt appears.
Type
"admin"
for the
User Name
and
"0000"
in the
Password
field.
Click
OK
Advertisement
Table of Contents
