Buick Verano 2017 Owner's Manual page 158

Review the controls and
operation of the infotainment
system.
Pair cell phone(s) to the vehicle.
The system may not work with
all cell phones. See Pairing in
this section.
If the cell phone has voice
dialing capability, learn to use
that feature to access the
address book or contact list. See
Voice Pass-Thru in this
section.
See Storing and Deleting Phone
Numbers in this section.
{
Warning
When using a cell phone, it can
be distracting to look too long or
too often at the screen of the
phone or the infotainment system.
Taking your eyes off the road too
long or too often could cause a
crash resulting in injury or death.
Focus your attention on driving.
Vehicles with a Bluetooth system
can use a Bluetooth-capable cell
phone with a Hands-Free Profile to
make and receive phone calls. The
infotainment system and voice
recognition are used to control the
system. The system can be used
while in ON/RUN or ACC/
ACCESSORY. The range of the
Bluetooth system can be up to 9.1 m
(30 ft). Not all phones support all
functions and not all phones work
with the Bluetooth system. See
www.gm.com/bluetooth for more
information about compatible
phones.
Bluetooth Controls
Use the buttons located on the
infotainment system and the
steering wheel to operate the
Bluetooth system.
Steering Wheel Controls
/ : Press to answer incoming
calls, confirm system information,
and start voice recognition.
/ : Press to end a call, reject
a call, or cancel an operation.
Infotainment System
Infotainment System Controls
If equipped, the infotainment system
allows certain controls to be
selected on the infotainment display.
For information about how to
navigate the menu system using the
infotainment controls, see
Operation 0 142.
V
/ : Press to enter the Phone
main menu. Press to mute the audio
system.
Voice Recognition
The voice recognition system uses
commands to control the system
and dial phone numbers.
Noise : The system may not
recognize voice commands if there
is too much background noise.
When to Speak : A tone sounds to
indicate that the system is ready for
a voice command. Wait for the tone
and then speak.
How to Speak : Speak clearly in a
calm and natural voice.
157