Asus Q170M2 Manual page 80

Chassis1/2 Q-Fan Control [Enabled]
[PWM mode]
[DC mode]
[Disabled]
The following items appear only when you set the Chassis Fan 1/2 Q‑Fan Control to [PWM
Mode] or [DC Mode].
Chassis Fan 1/2 Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Configuration options: [CPU] [MotherBoard]
Chassis1/2 Fan Speed Low Limit [600 RPM]
This item appears only when you enable the Chassis1/2 Q‑Fan Control feature and allows
you to disable or set the chassis1/2 fan warning speed. Configuration options: [Ignore]
[200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis1/2 Fan Profile [Standard]
This item appears only when you enable the Chassis1/2 Q‑Fan Control feature and allows
you to set the appropriate performance level of the chassis1/2 fan.
[Standard]
[Silent]
[Turbo]
[Manual]
The following four items appear only when you set Chassis1/2 Fan Profile to [Manual].
Chassis1/2 Upper Temperature [70]
Use the <+> and <‑> keys to adjust the upper limit of the chassis temperature. The
values range from 40ºC to 75ºC.
Chassis1/2 Fan Max. Duty Cycle(%) [100]
Use the <+> and <‑> keys to adjust the maximum chassis fan duty cycle. The values
range from 60% to 100%. When the chassis temperature reaches the upper limit, the
chassis fan will operate at the maximum duty cycle.
Chassis Fan 1/2/3 Middle Temperature [45]
Use the <+> or <‑> keys to set the value for Chassis Fan Middle Temperature.
Chassis Fan 1/2/3 Middle Duty Cycle(%) [60]
Use the <+> or <‑> keys to adjust the chassis fan middle duty cycle. The values range
from 20% to 100%.
Chassis1/2 Lower Temperature [40]
Displays the lower limit of the chassis temperature.
Chassis1/2 Fan Min. Duty Cycle(%) [60]
Use the <+> and <‑> keys to adjust the minimum chassis fan duty cycle. The values
range from 60% to 100%. When the chassis temperature is under 40ºC, the chassis
fan will operate at the minimum duty cycle.
2-40
Enables the chassis Q‑Fan control in PWM mode for 4‑pin chassis fan.
Enables the chassis Q‑Fan control in DC mode for 3‑pin chassis fan.
Disables the chassis Q‑Fan control feature.
Sets to [Standard] to make the chassis1/2 fan automatically adjust
depending on the chassis1/2 temperature.
Sets to [Silent] to minimize the fan speed for quiet chassis1/2 fan operation.
Sets to [Turbo] to achieve maximum chassis1/2 fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
Chapter 2: Getting started