Oil Change Indicator Reset; Engine Coolant Check - Ford Edge 2016 Owner's Manual

Only use oils certified for gasoline engines
by the American Petroleum Institute (API).
An oil with this trademark symbol
conforms to the current engine and
emission system protection standards and
fuel economy requirements of the
International Lubricants Specification
Advisory Council (ILSAC), comprised of
U.S. and Japanese automobile
manufacturers.
WARNINGS
Only add oil when the engine is cold.
If the engine is hot, wait 10 minutes
for the engine to cool down.
Do not remove the filler cap when
the engine is running.
1. Remove the engine oil filler cap.
2. Add engine oil that meets Ford
specifications. See Maintenance
(page 261).
3. Wipe off any spilled oil.
4. Replace the engine oil filler cap. Turn
it clockwise until you feel a strong
resistance.
Note: Do not add oil further than the
maximum mark. Oil levels above the
maximum mark may cause engine damage.
Note: Soak up any spillage with an
absorbent cloth immediately.
OIL CHANGE INDICATOR
RESET
Use the information display controls on
the steering wheel to reset the oil change
indicator.
Edge/Galaxy/S-MAX (CDQ) Canada/United States of America, enUSA, First Printing
Maintenance
From the main menu scroll to:
Message
Settings
Vehicle
Oil Life
Hold OK to
Reset

ENGINE COOLANT CHECK

Do not add engine coolant when the
engine is hot. Steam and scalding
liquids released from a hot cooling
system can burn you badly. Also, spilling
coolant on hot engine parts can burn you.
267
Action and description
Press the right arrow button,
then from this menu scroll
to the following message.
Press the right arrow button,
then from this menu scroll
to the following message.
Press the right arrow button,
then from this menu scroll
to the following message.
Press and hold the OK
button until the instrument
cluster displays the
following message.
Reset Successful
When the oil change indic-
ator resets the instrument
cluster displays 100%.
Remaining Life
{00}%
If the instrument cluster
displays one of the following
messages, repeat the
process.
Not Reset
Reset Cancelled
WARNINGS