Extending The Cooling Down Time - Miele TDA 150 C Operating Instructions Manual

Programmable functions
Extending the cooling down
time
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure the
following:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
 Press the Start button and keep it
pressed in whilst carrying out steps
-.
 Switch the tumble dryer on.
 Wait until the indicator light for the
Start button lights up constantly . . .
 . . . and then release the Start button.
 Turn the programme selector to
Cottons Machine iron.
The Empty the container indicator light
will flash seven times.
54
The option selected will be displayed
by a number which will alternate with
.
 Factory default
 Cooling down 5 minutes longer
(The Clean out airways indicator light
will also flash once)
 Cooling down 10 minutes longer
(The Clean out airways indicator light
will also flash twice)
 Pressing the Start button switches
between the options.
 Switch the tumble dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
 Carry out steps -.
 Switch the dryer off after checking
the indicator lights.