Load�Ng The Rew�Nd Spool On The Med�A Take-Up Un�T - Canon imagePROGRAF iPF8000S User Manual

Loading the Rewind Spool on the Media Take-up Unit
1.
When using the Output Stacker, stow the Output Stacker before this procedure. (→P.162)
Important
•
Arrange the Basket Cloth and Basket Rod so they do not interfere with the Media Take-up Sensor.
•
Do not put anything in front of the Media Take-up Sensor that might interfere with it. This may
impair operation.
2.
Unlock the ange on the left side of the Rewind Spool by lifting the lever (a) from the shaft
side. Remove the ange.
3.
When rewinding rolls with 3-inch paper cores, insert the 3-inch Adapter on the anges at both
ends.
4.
Insert the paper core, which serves as the spindle for rewinding a roll, on the Rewind Spool.
Important
•
On the Rewind Spool, always use a paper core that is the same size as the roll to be rewound.
Media take-up unit
Handling Paper 167