Quickie Attitude Directions For Use Manual
Hide thumbs
Also See for Attitude:
- Directions for use manual (136 pages) ,
- Owner's manual (19 pages) ,
- Owner's manual (14 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for Quickie Attitude
Summary of Contents for Quickie Attitude
- Page 1 ADD ON BIKE DIRECTIONS FOR USE Attitude & Attitude Hybrid 000690707.05...
- Page 2 IF YOU ARE VISUALLY IMPAIRED, THIS DOCUMENT CAN BE VIEWED IN PDF FORMAT AT WWW.SUNRISEMEDICAL.CO.UK Add-on Bike Components production. This products meet the requirements in accordance with EC guidelines. Options or accessories shown are available at extra cost.
- Page 3 1. Front wheel 1. Przednie koło 1. Přední kolo 2. Widełki 2. Vidlice 2. Fork 3. Uchwyt 3. Rukojeť 3. Handle 4. Silnik w piaście 4. Motor v náboji kola 4. Hubmotor 5. Korba z uchwytem 5. Klika s rukojeťmi 5.
-
Page 4: Table Of Contents
Inflation: 9.0 Tyre Maintenance 10.0 Maitenance Brakes Maintaining the Brakes: 11.0 Cleaning/Hygene Hygiene when being reused: 12.0 Disposal / Recycling of Materials Materials Used: 13.0 Nameplate Dealer signature and stamp 14.0 Torque Torque Settings: 15.0 Technical Data Attitude/Attitude Hybrid Rev.1.0... -
Page 5: Foreword
Foreword Dear Customer, The ATTITUDE is a mechanical propelled / powered drive unit, which is attached to a wheelchair, to support the We are very happy that you have decided in favour of a mobility and integration of the wheelchair user in daily life. -
Page 6: General Safety Notes And Driving Limits
The max speed is 25 km/h. Never exceed this max speed. • At night and dawn/dusk, always use the lights. • When you are travelling long distances, we recommend that you take a spare battery with you. Attitude/Attitude Hybrid Rev.1.0... -
Page 7: Safety Instructions - Prior To Each Ride
• Due to the increased turning circle, turning can be sometimes impossible e.g. in corridors and other confined spaces. • Only use the defined brackets to fix objects, (additional weights, bike panniers) • When driving on pedestrian areas, observe the maximum permitted speed (walking speed) Attitude/Attitude Hybrid Rev.1.0... -
Page 8: Warranty
• repairs or other works are carried out by non-authorised persons • third-party parts are installed or connected without prior agreement with Sunrise Medical. Sunrise Medical GmbH is not responsible for the safety of the add-on bike if any of the above applies. Attitude/Attitude Hybrid Rev.1.0... -
Page 9: Handling
If the Attitude Hybrid has not been use for 48 hours or • For extra security on the Attitude Hybrid, please more, please turn the battery on. -
Page 10: Adjusting The Pedal Position
Docking Bottom • Cables should never be kinked or trapped, as this could cause damage and loss of function. Position 2. Fig.4.4 126 mm Bottom Docking Position 1 Fig.4.5 146 mm Bottom Docking Position 2 Attitude/Attitude Hybrid Rev.1.0... - Page 11 2 75 - 95 position 2 position 2 75 - 95 position 2 position 2 75 - 95 position 2 position 2 75 - 95 Frame angle: 95° Seat depth: Seat height rear: Seat height front: COG: Attitude/Attitude Hybrid Rev.1.0...
-
Page 12: Docking And Dedocking
• Pull the red locking lever backwards until it locks firmly and completely, D. • Clamping must be on the metal tube without any parts, (e.g. calf strap, frame protectors), in between. • Ensure the wheelchair is fully connected with the add- on bike. Attitude/Attitude Hybrid Rev.1.0... -
Page 13: De-Docking: Fig.5.6 - Fig.5.10
• Pull the add-on bike downwards towards yourself until the docking pins are totally disengaged. • Hold this position and push the add-on bike forward so that it is clear of your wheelchair, E. Fig.5.6 Fig.5.9 Fig.5.10 Attitude/Attitude Hybrid Rev.1.0... -
Page 14: Functional Components
If this happens the brake pads must be replaced. The brake disc must be professionally degreased with a brake cleaner. • Be aware that the condition of the ground surface can significantly affect braking efficiency. Attitude/Attitude Hybrid Rev.1.0... -
Page 15: Coaster Brake (Fig.6.4)
Turning the gripshift switch to the left activates the next lower gear. Turning the grip shift switch to the right activates the next higher gear. CAUTION! Please contact your authorized dealer in case the derailleur gears/ gear hub does not functioning correctly Attitude/Attitude Hybrid Rev.1.0... -
Page 16: Maintenance
Check, clean and oil the gear components (including chain) Check the spoke tension and the rim, hub for damag- es on the add-on bike and the wheelchair Check all cable and electrical connectors Check tightness of steering shaft Attitude/Attitude Hybrid Rev.1.0... -
Page 17: Service Period
Check regularly the condition of the brake pads and the brake disc. After 8000- 10.000km the brake cables should be replaced completely. The brake pads need to be replaced if the thickness measured at the thinnest point is 2,5 mm. Attitude/Attitude Hybrid Rev.1.0... -
Page 18: Disposal / Recycling Of Materials
All add-on bikes must be used in accordance with the manufacturer’s guidelines. Sunrise Medical GmbH & Co. KG Kahlbachring 2-4 69254 Malsch/Heidelberg Deutschland Tel.: +49 (0) 7253/980-0 Fax: +49 (0) 7253/980-222 kundenservice@sunrisemedical.de www.SunriseMedical.de Attitude/Attitude Hybrid Rev.1.0... -
Page 19: Torque
-20° to + 50° * Depending on the wheelchair – add-on bike combination values can vary e.g. rear wheel extension, Closed surface conditions, user weight, driving capability, add- Adjusting Nut on weight. Open Lever Nut Quick-release lever Attitude/Attitude Hybrid Rev.1.0... - Page 20 Attitude Hybrid Section Neodrives System Part 1 Neodrives sMMI and Motor Part 2 Neodrives Battery Attitude/Attitude Hybrid Rev.1.0...
-
Page 21: Definitions Of Words Used In This Manual
Liability: Note on the sMMI plugs: (Fig.3.15) Thermal management: Motor: Removing the drive wheel: Attaching the drive wheel: Cleaning the motor and sMMI: Motor: sMMI Unit: Transportation: Safety precautions: Error indications and possible remedies: Attitude/Attitude Hybrid Rev.1.0... -
Page 22: Warning
• Unauthorised attachments or use of the neodrives components on bicycles or a different add-on bike to the one supplied to you. The manufacturer shall not be liable for any damage caused by misuse of the components. Attitude/Attitude Hybrid Rev.1.0... -
Page 23: Standard Scope Of Delivery
We reserve the right to modify the design and technology of our products to incorporate the latest developments. This operating manual is available for download on our website www.neodrives.de. If you require a version that is written in a larger font, contact our Alber Service Center. Attitude/Attitude Hybrid Rev.1.0... -
Page 24: Smart Man-Machine Interface (Smmi)
3.0 smart Man-Machine Interface (sMMI) Fig.3.1 Controller: The controller fitted to the handlebar of your Attitude is used to access menus and activate functions in the sMMI. The following functions are stored: Button 1 = UP (one step upwards) Button 2 = confirm menu key or selection Button 3 = DOWN (one step downwards). -
Page 25: Caution
If your add-on bike is not used for 10 minutes, the system is automatically switched off. Pressing the menu button again switches the system on once more. km/h CAUTION! Do not switch your Attitude off by removing the sMMI, the electronics could be damaged by this. Attitude/Attitude Hybrid Rev.1.0... -
Page 26: Start Menu
According to the selected assistance level, field [6] gives an indication of the distance that can be travelled using motorised support. The higher the selected assistance level, the more energy is consumed by the motor. Fig.3.7 The range to be achieved reduces accordingly. Attitude/Attitude Hybrid Rev.1.0... -
Page 27: Activating Recuperation
• Activating recuperation is not possible with a fully charged battery because this could otherwise be damaged as a result of overcharging. Once at a battery capacity ≤ 90 %, recuperation can be activated. Attitude/Attitude Hybrid Rev.1.0... -
Page 28: Braking Assistant
However, the assistant is only effective if, once adjusting the pedalling, the speed is not more than 25 km/h. By manually braking the assistant can be taken back to the speed window where it automatically activates. Attitude/Attitude Hybrid Rev.1.0... -
Page 29: Pushing Aid
As already seen in the functions described in previous sections, you can also set the date and time in the known way from the start menu in the various sub menus (see also the overview in section 3). You can modify the required parameters here. Attitude/Attitude Hybrid Rev.1.0... -
Page 30: Travel Modes
Before, during and after a journey, various values and information are displayed in field [12] and regularly saved. You can adjust this in the normal way by tapping menu button [2] on the controller to display the subsequent function. Attitude/Attitude Hybrid Rev.1.0... -
Page 31: Information And Warning Symbols
During a downhill journey your Attitude brakes automatically within the pre-set limits (see section 3.2.6). Service reminder: The service interval of your Attitude has lapsed. Please arrange a service appointment with your specialist dealer. The display can be reset by your dealer using diagnosis software. -
Page 32: Easy Display Mode
In addition to English we can also set Dutch and French. However, if required, an English / Dutch / French interface can be activated. Attitude/Attitude Hybrid Rev.1.0... -
Page 33: Programming Options By The Specialist Dealer
Speed of the pushing aid forwards: Set to 4 km/h as default. Standard assistance level: The assistance level that is always available when the Attitude is switched on. Can be set in the range 0–5, the value 3 is pre-programmed as default. sMMI standard settings:... -
Page 34: Note On The Smmi Plugs: (Fig.3.15)
Tip: Ideally, by selecting a lower gear with higher cadence, the travel mode “Tour” or “Eco”, a reduced assistance level and/or a short break (in which the drive can cool down again), you can continue to cycle. Attitude/Attitude Hybrid Rev.1.0... -
Page 35: Motor
Motor: The drive wheel of your Attitude can be removed from the bicycle frame at any time, for example, for cleaning purposes or in case of a puncture. Proceed extremely... -
Page 36: Attaching The Drive Wheel
• Always use the original gear cluster built by the bicycle manufacturer. Using other makes may lead to restricted function or to the gear cluster scraping the chainstays Attitude/Attitude Hybrid Rev.1.0... -
Page 37: Cleaning The Motor And Smmi
(isopropyl alcohol). •• Remove the battery and the sMMI from the bicycle before you attach the Attitude to the bicycle rack of your car. This also reduces the weight that you need to lift, Motor: particularly when using a roof rack system. -
Page 38: Error Indications And Possible Remedies
The display shows the symbol for the service • You may continue to use your bike normally, but please arrange reminder, (section 3.2.11). for your authorised dealer to service it at your earliest convenience. • After servicing they will reset the display. Attitude/Attitude Hybrid Rev.1.0... -
Page 39: Reference To Additional Documentation
Standard scope of delivery (neodrives components): • Battery including 1 key pair. • Battery slide rail to fit the battery (already installed on the add-on bike). • This operating manual Attitude/Attitude Hybrid Rev.1.0... -
Page 40: Technical Data
This operating manual is also available to download from our website www.neodrives.de. Key Elements Overveiw: Battery Motor Battery (housing) Motor cable connector 7 Motor Charger socket / motor connection On/off button Charging device LED display Charging cable connector 9 On the add-on bike Battery slide rail Fig.5.1 Attitude/Attitude Hybrid Rev.1.0... -
Page 41: Safety Instructions/Precautions
Please contact your specialist dealer and discuss with them the next steps with regard to return and repair. The defective/damaged battery must not be used again or opened. •• Always ensure that the battery is kept clean and dry. Attitude/Attitude Hybrid Rev.1.0... -
Page 42: Safety Information And Precautions On How To Transport And Ship The Battery
•• Be aware of condensation. If the charger is brought from a cold into a warm room, condensation may form. In this case, refrain from using the charger until all condensation has dissipated. Please note that this may take several hours. Attitude/Attitude Hybrid Rev.1.0... -
Page 43: Operation
Active mode when switched on. If the battery cannot be switched on, the cell voltage may be too low. In this case connect the charger and then press the on/off button [4]. The battery will be charged for a minute. Attitude/Attitude Hybrid Rev.1.0... -
Page 44: Battery Capacity Indicator
• If the battery has been used in the past 48 hours: • Tap button [4]. • Now the LEDs indicate the capacity of the battery as shown in the following table. LED lights Steadily LED Flashes Battery Charge Attitude/Attitude Hybrid Rev.1.0... -
Page 45: Switching Off The Battery
•• Pull the battery [1] upwards about 2 cm along the slide rail [6] and then remove it completely. •• Store the battery in a clean place. CAUTION! Ensure that the socket [3] does not come into contact with any metal Attitude/Attitude Hybrid Rev.1.0... -
Page 46: Charging The Battery
10 °C and 30 °C Connecting the battery charger: The battery [1] does not need to be removed from the Attitude for charging, it can stay where it is. Only the motor cable plug [9] needs to be removed (see section 4.2). Then, proceed as before. -
Page 47: Keys
/ is used contrary to the intended use. Sunrise Medical GmbH & Co. KG Kahlbachring 2-4 69254 Malsch/Heidelberg Deutschland Tel.: +49 (0) 7253/980-0 Fax: +49 (0) 7253/980-222 kundenservice@sunrisemedical.de www.SunriseMedical.de Fig.7.10 Identifier Attitude/Attitude Hybrid Rev.1.0... - Page 48 ADD ON BIKE DIRECTIONS FOR USE Attitude Power 000690707.14...
- Page 49 IF YOU ARE VISUALLY IMPAIRED, THIS DOCUMENT CAN BE VIEWED IN PDF FORMAT AT WWW.SUNRISEMEDICAL.CO.UK Add-on Bike Components production. This products meet the requirements in accordance with EC guidelines. Options or accessories shown are available at extra cost.
- Page 50 1. Przednie koło 1. Front wheel 1. Přední kolo 2. Widełki 2. Fork 2. Vidlice 3. Wyświetlacz 3. Display 3. Displej 4. Silnik w piaście 4. Hubmotor 4. Motor v náboji kola 5. Kierownica 5. Handlebar 5. Řídítka 6. Przepustnica 6 Throttle 6 Regulátor 7.
- Page 51 10.0 Maitenance Brakes Maintaining the Brakes: 11.0 Cleaning/Hygene Hygiene when being reused: 12.0 Disposal / Recycling of Materials Materials Used: 13.0 Nameplate 14.0 Torque Torque Settings: 15.0 Technical Data Dealer signature and stamp Attitude Power Rev.1.0...
-
Page 52: Use
Foreword Dear Customer, The ATTITUDE is a powered drive unit, which is attached to a wheelchair, to support the mobility and integration of We are very happy that you have decided in favour of a the wheelchair user in daily life. It is designed for personal high-quality product from SUNRISE MEDICAL. -
Page 53: General Safety Notes And Driving Limits
Example: going round corners. "If I want to use the Attitude Power version 23 kph in another • A three-wheeled device is always less stable than a country, I will first obtain information about the regulations four-wheeled device. -
Page 54: Safety Instructions - Prior To Each Ride
• Only use the defined brackets to fix objects, (additional weights, bike panniers) • When driving on pedestrian areas, observe the maximum permitted speed (walking speed) • Always follow the road traffic regulations when driving Attitude Power Rev.1.0... -
Page 55: Warranty
• repairs or other works are carried out by non-authorised persons • third-party parts are installed or connected without prior agreement with Sunrise Medical. Sunrise Medical GmbH is not responsible for the safety of the add-on bike if any of the above applies. Attitude Power Rev.1.0... -
Page 56: Handling
• DO NOT sit on the add-on bike during transportation dents, distortions and other defects. in a vehicle. • The scope of delivery consist usually of the ATTITUDE • Always use a properly secured vehicle seat. add-on bike: • The product and all its components must be secured during transport so that they are not damaged (e.g. -
Page 57: Adjusting The Handlebar Position
Docking Bottom settings, (Fig.4.3 - 4.6). Position 2. WARNING! • Ensure that all cables are free from entrapment and kinks. Fig.4.5 Fig.4.1 126 mm Bottom Docking Position 1 Fig.4.6 Fig.4.2 146 mm 50 MM Bottom Docking Position 2 Attitude Power Rev.1.0... - Page 58 75 - 95 mm 42 mm Position 2 Position 2 550 mm 290 mm 25 mm 75 - 95 mm 45 mm Position 2 Position 2 560 mm 300 mm 25 mm 75 - 95 mm 49 mm Attitude Power Rev.1.0...
-
Page 59: Docking And Dedocking
(e.g. calf strap, frame protectors), in between. • Ensure the wheelchair is fully connected with the add- on bike, (see Fig.5.0). • Při upínání ke kovové trubce se mezi svorkou a kovovou trubkou nesmí nacházet žádné součásti (např. lýtkový pás, chrániče rámu). Attitude Power Rev.1.0... -
Page 60: De-Docking: Fig.5.6 - Fig.5.10
The parking brake is assembled to the fork and locks in automatically when activated. Therefore the red lever Fig.5.8 must lock in. The add-on bike should not move when the parking brake is activated, ensuring parking is safe To release the parking brake push the red lever. Attitude Power Rev.1.0... -
Page 61: Main Brakes (Fig.6.3)
• Never operate the throttle when the add-on bike is not attached to the wheelchair!! • Never operate the throttle during transfer and docking!! • Always switch the battery off when not using the add- on bike!! Attitude Power Rev.1.0... -
Page 62: Maintenance
Check tyres (tread, cracks, damages) and replace if needed Check the spoke tension and the rim, hub for damag- es on the add-on bike and the wheelchair Check all cable and electrical connectors Check tightness of steering shaft and handlebars. Attitude Power Rev.1.0... -
Page 63: Service Period
Check regularly the condition of the brake pads and the brake disc. After 8000- 10.000km the brake cables should be replaced completely. The brake pads need to be replaced if the thickness measured at the thinnest point is 2,5 mm. Attitude Power Rev.1.0... -
Page 64: Disposal / Recycling Of Materials
All add-on bikes must be used in parts or to file a claim: accordance with the manufacturer’s guidelines. Sunrise Medical GmbH & Co. KG Kahlbachring 2-4 69254 Malsch/Heidelberg Deutschland Tel.: +49 (0) 7253/980-0 Fax: +49 (0) 7253/980-222 kundenservice@sunrisemedical.de www.SunriseMedical.de Attitude Power Rev.1.0... -
Page 65: Torque
100-240 VAC 50/60 hz Operating Temperature 0°C - 40°C Storage Temperature -40°C - 80°C Depending on the wheelchair – add-on bike combination values can vary e.g. rear wheel extension, surface conditions, user weight, driving capability, add-on weight. Attitude Power Rev.1.0... - Page 66 Ansmann System Part 1 Ansmann Display Attitude Power Rev.1.0...
- Page 67 4.0 Drive Wheel and Motor Cleaning the motor: Along with this operating manual, your add-on Motor: bike comes with additional documents. Display: Please observe the specifications and 5.0 Cleaning instructions in these documents. Sunlight/direct heat: 6.0 Safety Precautions Attitude Power Rev.1.0...
-
Page 68: Introduction
• Unauthorised attachments or use of the Ansmann components on bicycles or a different add-on bike to the one supplied to you. The manufacturer shall not be liable for any damage caused by misuse of the components. Attitude Power Rev.1.0... -
Page 69: Ansmann Components
This operating manual is available for download on our website www.SunriseMedical.co.uk. If you require a version that is written in a larger font, contact our Customer Service Center. Attitude Power Rev.1.0... -
Page 70: Warning
Tighten the Allen screw of the clamp so that the display does not move on the handlebar, (Fig.3.2). CAUTION! Make sure that the distance to the speed sensor is not more than 5mm from the magnet, (Fig.3.3). Attitude Power Rev.1.0... -
Page 71: Initial Start-Up Display
• Level 1 ≈ 0 kp/h • Level 2 ≈ 6 kp/h • Level 3 ≈ 6 kp/h Fig.3.8 • Level 4 ≈ 6 kp/h • Level 5 ≈ 15 kp/h • Level 6 ≈ 23 kp/h Attitude Power Rev.1.0... - Page 72 25-622 700X25C 2146 57-559 26x2.125 2133 28-622 700X28C 2149 37-590 26x1 3/8 2105 32-622 700X32C 2174 37-584 26x1 3/8x1 1/2 2086 37-622 700X35C 2205 20-571 26x3/4 1954 40-622 700X40C 2224 * European Tyre and Rim Technical Organisation Attitude Power Rev.1.0...
-
Page 73: Distance, Trip Distance, Trip Time
Press the button untill the setting "TRIP" is displayed. Press and hold the button again for 3 seconds. This will reset both the Trip Odometer, (TRIP) and the daily travel time, (TRIP TIME), to zero. TRIP TRIP TIME Attitude Power Rev.1.0... -
Page 74: Attaching The Drive Wheel
This could cause the motor to heat up and in an extreme case, prevent it from operating at full power. Even plastic parts age quicker under intense sunlight. Attitude Power Rev.1.0... - Page 75 Attitude Power Rev.1.0...
- Page 76 Ansmann System Part 2 Ansmann Battery Attitude Power Rev.1.0...
- Page 77 Switching off the battery: Removing the battery: Charging the battery: Connecting the battery charger: Charging process: LED displays during the charging process: Fuse Replacement At The Battery: Keys: Cleaning the battery: 5.0 Disposal Disposal: 6.0 Battery Charger 7.0 Liability Liability: Attitude Power Rev.1.0...
-
Page 78: Advice To The User Of Potential Risk Of
Standard scope of delivery (Ansmann components): • Battery including 1 key pair. • Battery slide rail to fit the battery (already installed on the add-on bike). • This operating manual Attitude Power Rev.1.0... -
Page 79: The Key Elements At A Glance
This operating manual is also available to download from our website www.ansmann.de The key elements at a glance: Battery Motor Battery (housing) Motor cable connector Motor Charger socket On/off button Charging device LCD display Charging cable connector On the add-on bike Battery slot Attitude Power Rev.1.0... -
Page 80: Safety Advice/Precautions
Damaged batteries must not be recharged or used checked by the manufacturer. Contact your specialist any further. dealer in this regard. You must not continue to use a • Damaged battery chargers (damage to the plug, damaged battery. housing, cable) must not be used. Attitude Power Rev.1.0... -
Page 81: Safety Information And Precautions On How To Transport And Ship The Battery
Please note that this may take several hours. • Never carry the charger by its power cable or the charger cable. • Never tug at the power cable to disconnect the charger from the mains socket. Attitude Power Rev.1.0... -
Page 82: Battery
Insert the key [2] in the lock on the battery [1]. Carefully turn the key [2] anticlockwise until it stops. The lock is now released. Pull the battery [1] downwards out of the slot and then remove it completely. Store the battery in a safe clean place. Attitude Power Rev.1.0... -
Page 83: Charging The Battery
3.0 LED displays during the charging process: During charging, the LED display on the battery shows the charging level. Press the button, (A), briefly to display the charge status, Fig.4.4 (Fig.4.5). Fig.4.5 Füllstand Batterie/Battery Level 100% Attitude Power Rev.1.0... -
Page 84: Fuse Replacement At The Battery
• Avoid direct sunlight. • Avoid storage in humid areas to prevent corrosion on the plug contacts. • When the battery is not in use, recharge it at least every 12 weeks to prevent damage to the battery.” Attitude Power Rev.1.0... -
Page 85: Disposal
The number in the logo indicates how many years the product can be used as intended. Cells contain lithium Do not dispose of the battery pack with household waste. Sign and polarity of the charging socket/the charger Attitude Power Rev.1.0... -
Page 86: Battery Charger
• Children should be supervised to make sure they do not play with the appliance. • If the power connection of this device is damaged, it must be replaced by a special connecting cable, which is available from the manufacturer or service agent. Attitude Power Rev.1.0...