Speaker Connection - Boss Audio Systems BV9351B User Manual

Speaker Connection

After connecting, when you start up the reverse gear, the unit will receive the picture from car rear
view camera.
Note:
Only use groundless loudspeakers.
-
Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your
-
loudspeakers at higher volumes.
Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage
-
the unit.
Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body
-
(GND). The unit is using a BTL circuit and each loudspeaker must be connected with insulated
cables according the diagram.
Loudspeaker cables and/or optional external power amplifiers must always be about 30cm away
-
from the antenna and/or antenna extension parts.
Connect the speakers according the following diagram, incorrect connections will damage the unit or
your loudspeakers.
Correct connection
Left front - Right front | Left rear - Right rear
Incorrect connections
04