Step 6. Leveling The Dishwasher - Samsung DW-BG97 Series Installation Manual

Installing your dishwasher
STEP 6. LEVELING THE DISHWASHER
Min.
4
4 mm
2
1. Push half the product into the space under the sink and make sure that the product is level using the
leveler.
If you put the entire product under the sink, you cannot adjust the legs at both ends of the bottom
front of the product.
CAUTION
2. You can adjust the height of the front of the product by turning the legs at both ends of the bottom front
of the product.
1) Slightly lift up the front of the product (when put in half way) and turn the legs to adjust the height.
2) You can adjust the height up to 60 mm.
3. You can adjust the height of the back of the product by turning the knob with a Torx T20 screwdriver.
Turn it clockwise to lower the height or turn it counterclockwise to raise the height.
4. Install the product so that there is a space of at least 4 mm between the top of the product and the
bottom of the counter top.
18_ Installing your dishwasher
DD68-00132A-02_S04_140602_EN.indd 18
3
2/6/2014 18:36:45